WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
Xen

xen-users

[Top] [All Lists]

[Xen-users] Question on default xen network configs

To: <xen-users@xxxxxxxxxxxxxxxxxxx>
Subject: [Xen-users] Question on default xen network configs
From: "Phil Winterfield (winterfi)" <winterfi@xxxxxxxxx>
Date: 2008年8月20日 13:41:45 -0700
Authentication-results: sj-dkim-4; header.From=winterfi@xxxxxxxxx; dkim=pass ( sig from cisco.com/sjdkim4002 verified; );
Delivery-date: 2008年8月20日 13:41:52 -0700
Dkim-signature: v=1; a=rsa-sha256; q=dns/txt; l=19836; t=1219264871; x=1220128871; c=relaxed/simple; s=sjdkim4002; h=Content-Type:From:Subject:Content-Transfer-Encoding:MIME-Version; d=cisco.com; i=winterfi@xxxxxxxxx; z=From:=20=22Phil=20Winterfield=20(winterfi)=22=20<winterfi@ cisco.com> |Subject:=20Question=20on=20default=20xen=20network=20confi gs |Sender:=20; bh=gApU5yKN4BzJPS2aq7AULTdOxAMEac7ccw2zI8ExVug=; b=IEscfB2kcrGsOHB0c5cMyuu1wwrqDcZ4emApMI14rmdp+X5yiiyVFcPaua Z+mnv6gLUHHGGe2aPGFRsMqMrGC5rD13d83ekAXdPwK6opelqfwMlY8sl1RO XRYYnp6VZu;
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
Thread-index: AckDBSjtCna5tyy3SZahT68h+Gs+rA==
Thread-topic: Question on default xen network configs

I have read through the wiki pages and other docs on what happens with xen network startup (split driver model) and it seems clear enough, but I am finding that the default configurations aren’t showing the xenbr0 and vif’s. According to what I have read, this should be done by default when ‘(network-script network-bridge)’ is excuted in the xend startup script. The ifconfig is shown below. Are there other steps that are needed to get this default config to show up?

Thanks,

Phil

[root@localhost ios]# ifconfig

eth0 Link encap:Ethernet HWaddr 00:15:17:46:EF:CA

inet addr:192.168.102.94 Bcast:192.168.102.95 Mask:255.255.255.224

inet6 addr: fe80::215:17ff:fe46:efca/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:715 errors:0 dropped:0 overruns:0 frame:0

TX packets:347 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:92461 (90.2 KiB) TX bytes:56883 (55.5 KiB)

eth1 Link encap:Ethernet HWaddr 00:15:17:46:EF:CB

inet addr:192.168.102.71 Bcast:192.168.102.95 Mask:255.255.255.224

inet6 addr: fe80::215:17ff:fe46:efcb/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:30 errors:0 dropped:0 overruns:0 frame:0

TX packets:33 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:10710 (10.4 KiB) TX bytes:8079 (7.8 KiB)

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0

inet6 addr: ::1/128 Scope:Host

UP LOOPBACK RUNNING MTU:16436 Metric:1

RX packets:12 errors:0 dropped:0 overruns:0 frame:0

TX packets:12 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:964 (964.0 b) TX bytes:964 (964.0 b)

peth0 Link encap:Ethernet HWaddr 00:15:17:46:EF:CA

inet6 addr: fe80::215:17ff:fe46:efca/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:1358 errors:0 dropped:0 overruns:0 frame:0

TX packets:424 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:100

RX bytes:154616 (150.9 KiB) TX bytes:72105 (70.4 KiB)

Base address:0x2020 Memory:98820000-98840000

peth1 Link encap:Ethernet HWaddr 00:15:17:46:EF:CB

inet6 addr: fe80::215:17ff:fe46:efcb/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:498 errors:0 dropped:0 overruns:0 frame:0

TX packets:302 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:100

RX bytes:95790 (93.5 KiB) TX bytes:48500 (47.3 KiB)

Base address:0x2000 Memory:98800000-98820000

[root@localhost ios]# brctl show

bridge name bridge id STP enabled interfaces

eth0 8000.00151746efca no peth0

eth1 8000.00151746efcb no peth1

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users 
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date: Re: [Xen-users] DomU ethernet speed? , Simon Gottschlag
Next by Date: [Xen-users] Large Network Traffic brings the server down , Pepe Barbe
Previous by Thread: [Xen-users] booting XEN with /usr mounted through NFS , Luca
Next by Thread: Re: [Xen-users] Question on default xen network configs , Asim
Indexes: [Date] [Thread] [Top] [All Lists]

Copyright ©, Citrix Systems Inc. All rights reserved. Legal and Privacy
Citrix This site is hosted by Citrix

AltStyle によって変換されたページ (->オリジナル) /