Hi,
I tried already a long time to enable network in my domU but I always
fail with:
# ifconfig eth0 192.168.0.1 up
SIOCSIFADDR: No such device
SIOCGIFFLAGS: No such device
Do I need to load a kernel module?
I use OpenSuse 10.2 with kernel 2.6.18.8-0.5-xen (for both domU and dom0).
My config:
kernel = "/boot/vmlinuz-xen"
ramdisk = "/home/jens/initrd.gz"
memory = 1024
name = "debian"
disk = [ "/home/jens/hda,hda1,w", "/home/jens/hda,hda2,w,", "/,hda3,r" ]
root = "/dev/hda2 ro"
vif = [ '' ]
network settings in dom0:
# ifconfig
eth0 Link encap:Ethernet HWaddr 00:19:5B:70:7B:6F 
 inet addr:192.168.0.1 Bcast:255.255.255.255 Mask:255.255.255.0
 inet6 addr: fe80::219:5bff:fe70:7b6f/64 Scope:Link
 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
 RX packets:310334 errors:0 dropped:0 overruns:0 frame:0
 TX packets:177949 errors:652 dropped:0 overruns:0 carrier:652
 collisions:104425 txqueuelen:1000 
 RX bytes:318922367 (304.1 Mb) TX bytes:21339374 (20.3 Mb)
 Interrupt:17 Base address:0xb000 
lo Link encap:Local Loopback 
 inet addr:127.0.0.1 Mask:255.0.0.0
 inet6 addr: ::1/128 Scope:Host
 UP LOOPBACK RUNNING MTU:16436 Metric:1
 RX packets:82102 errors:0 dropped:0 overruns:0 frame:0
 TX packets:82102 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0 
 RX bytes:5688468 (5.4 Mb) TX bytes:5688468 (5.4 Mb)
vif6.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF 
 UP BROADCAST NOARP MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0 
 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF 
 inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
 UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0 
 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Shouldn't there are a peth0, ...?
# brctl showstp xenbr0
xenbr0
 bridge id 8000.feffffffffff
 designated root 8000.feffffffffff
 root port 0 path cost 0
 max age 20.00 bridge max age 20.00
 hello time 2.00 bridge hello time 2.00
 forward delay 0.00 bridge forward delay 0.00
 ageing time 300.01
 hello timer 0.58 tcn timer 0.00
 topology change timer 0.00 gc timer 0.04
 flags 
vif6.0 (0)
 port id 0000 state disabled
 designated root 8000.feffffffffff path cost 100
 designated bridge 8000.feffffffffff message age timer 0.00
 designated port 8001 forward delay timer 0.00
 designated cost 0 hold timer 0.00
 flags 
I wonder especially about the state "disabled".
Network related domU kernel messages:
XENBUS: Device with no driver: device/vif/0
# xm list -l
 (device (vif (backend 0) (script vif-bridge) (mac 00:16:3e:05:5f:d0)))
Any idea?
Jens
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users