WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
Xen

xen-users

[Top] [All Lists]

[Xen-users] Need help setting up guest's networking

To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] Need help setting up guest's networking
From: YEVGENIY GOLDBERG <thegoldberg@xxxxxxx>
Date: 2007年4月28日 15:47:58 -0700
Delivery-date: 2007年4月28日 15:46:56 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxx
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
Greetings!
I finally got the install done for a couple of gust OSs (Win 2003 server & Suse 
Enterprise 10)
Bothe gusts are up and running, but - no networking.
My setup:
Hardware - AMD Athlon 4200+, ABIT Motherboard, 4 GB of DDR2 RAM, 2 onboard GB 
NICs
Host OS- Suse Linux Enterprise server 10
Xen - 3.0.2_09749-0.4
Config file for Win 2003 server guest:
# -*- mode: python; -*-
#============================================================================
# Python configuration setup for 'xm create'.
# This script sets the parameters used when a domain is created using 'xm 
create'.
# You use a separate script for each domain you want to create, or
# you can set the parameters for the domain on the xm command line.
#============================================================================
import os, re
arch = os.uname()[4]
if re.search('64', arch):
 arch_libdir = 'lib64'
else:
 arch_libdir = 'lib'
#----------------------------------------------------------------------------
# Kernel image file.
kernel = "/usr/lib/xen/boot/hvmloader"
# The domain build function. HVM domain uses 'hvm'.
builder='hvm'
# Initial memory allocation (in megabytes) for the new domain.
#
# WARNING: Creating a domain with insufficient memory may cause out of
# memory errors. The domain needs enough memory to boot kernel
# and modules. Allocating less than 32MBs is not recommended.
memory = 512
# Shadow pagetable memory for the domain, in MB.
# Should be at least 2KB per MB of domain memory, plus a few MB per vcpu.
shadow_memory = 8
# A name for your domain. All domains must have different names.
name = "win2003server"
# 128-bit UUID for the domain. The default behavior is to generate a new UUID
# on each call to 'xm create'.
#uuid = "06ed00fe-1162-4fc4-b5d8-11993ee4a8b9"
#-----------------------------------------------------------------------------
# the number of cpus guest platform has, default=1
#vcpus=1
# enable/disable HVM guest PAE, default=0 (disabled)
#pae=0
# enable/disable HVM guest ACPI, default=0 (disabled)
#acpi=0
# enable/disable HVM guest APIC, default=0 (disabled)
#apic=0
# List of which CPUS this domain is allowed to use, default Xen picks
#cpus = "" # leave to Xen to pick
#cpus = "0" # all vcpus run on CPU0
#cpus = "0-3,5,^1" # run on cpus 0,2,3,5
# Optionally define mac and/or bridge for the network interfaces.
# Random MACs are assigned if not given.
vif = [ 'type=ioemu, mac=00:16:3e:00:00:11, bridge=xenbr0' ]
# type=ioemu specify the NIC is an ioemu device not netfront
#vif = [ 'type=ioemu, bridge=xenbr0' ]
#----------------------------------------------------------------------------
# Define the disk devices you want the domain to have access to, and
# what you want them accessible as.
# Each disk entry is of the form phy:UNAME,DEV,MODE
# where UNAME is the device, DEV is the device name the domain will see,
# and MODE is r for read-only, w for read-write.
#disk = [ 'phy:hda1,hda1,r' ]
disk = [ 'file:/var/lib/xen/images/windisk.img,ioemu:hda,w', 
'phy:/dev/hda,hdb,r' ]
cdrom="/media/disk/iso/win2003server.iso"
#----------------------------------------------------------------------------
# Configure the behaviour when a domain exits. There are three 'reasons'
# for a domain to stop: poweroff, reboot, and crash. For each of these you
# may specify:
#
# "destroy", meaning that the domain is cleaned up as normal;
# "restart", meaning that a new domain is started in place of the old
# one;
# "preserve", meaning that no clean-up is done until the domain is
# manually destroyed (using xm destroy, for example); or
# "rename-restart", meaning that the old domain is not cleaned up, but is
# renamed and a new domain started in its place.
#
# The default is
#
on_poweroff = 'destroy'
on_reboot = 'destroy'
on_crash = 'destroy'
#
# For backwards compatibility we also support the deprecated option restart
#
# restart = 'onreboot' means on_poweroff = 'destroy'
# on_reboot = 'restart'
# on_crash = 'destroy'
#
# restart = 'always' means on_poweroff = 'restart'
# on_reboot = 'restart'
# on_crash = 'restart'
#
# restart = 'never' means on_poweroff = 'destroy'
# on_reboot = 'destroy'
# on_crash = 'destroy'
#on_poweroff = 'destroy'
#on_reboot = 'restart'
#on_crash = 'restart'
#============================================================================
# New stuff
device_model = '/usr/' + arch_libdir + '/xen/bin/qemu-dm'
#-----------------------------------------------------------------------------
# boot on floppy (a), hard disk (c) or CD-ROM (d)
# default: hard disk, cd-rom, floppy
boot="c"
#-----------------------------------------------------------------------------
# write to temporary files instead of disk image files
#snapshot=1
#----------------------------------------------------------------------------
# enable SDL library for graphics, default = 0
sdl=1
#----------------------------------------------------------------------------
# enable VNC library for graphics, default = 1
vnc=0
#----------------------------------------------------------------------------
# address that should be listened on for the VNC server if vnc is set.
# default is to use 'vnc-listen' setting from /etc/xen/xend-config.sxp
#vnclisten="127.0.0.1"
#----------------------------------------------------------------------------
# set VNC display number, default = domid
#vncdisplay=1
#----------------------------------------------------------------------------
# try to find an unused port for the VNC server, default = 1
#vncunused=1
#----------------------------------------------------------------------------
# enable spawning vncviewer for domain's console
# (only valid when vnc=1), default = 0
#vncconsole=0
vncviewer=0
#----------------------------------------------------------------------------
# no graphics, use serial port
#nographic=0
#----------------------------------------------------------------------------
# enable stdvga, default = 0 (use cirrus logic device model)
stdvga=0
#-----------------------------------------------------------------------------
# serial port re-direct to pty deivce, /dev/pts/n
# then xm console or minicom can connect
serial='pty'
#-----------------------------------------------------------------------------
# enable sound card support, [sb16|es1370|all|..,..], default none
#soundhw='sb16'
#-----------------------------------------------------------------------------
# set the real time clock to local time [default=0 i.e. set to utc]
#localtime=1
#-----------------------------------------------------------------------------
# start in full screen
#full-screen=1
#-----------------------------------------------------------------------------
# Enable USB support (specific devices specified at runtime through the
# monitor window)
#usb=1
# Enable USB mouse support (only enable one of the following, `mouse' for
# PS/2 protocol relative mouse, `tablet' for
# absolute mouse)
#usbdevice='mouse'
#usbdevice='tablet'
Config file for Suse Linux Enterprise 10 guest:
disk = [ 'file:/var/lib/xen/images/OraDb1/hda,hda,w', 'phy:/dev/hda,hdb,r' ]
memory = 1024
vcpus = 2
builder = 'linux'
name = 'OraDb1'
vif = [ 'mac=00:16:3e:f3:64:e9','bridge=xenbr0']
localtime = 0
on_poweroff = 'destroy'
on_reboot = 'restart'
on_crash = 'restart'
extra = ' TERM=xterm'
bootloader = '/usr/lib/xen/boot/domUloader.py'
bootentry = 'hda2:/boot/vmlinuz-xen,/boot/initrd-xen'
boot="c"
out put of brctl show:
bridge name bridge id STP enabled interfaces
xenbr0 8000.feae66791813 no vif0.0
 peth0
 vif2.1
 vif2.0
 tun0
 vif3.0
Output of ifconfig on the host:
eth0 Link encap:Ethernet HWaddr 00:50:8D:94:71:4A
 inet addr:67.184.153.5 Bcast:255.255.255.255 Mask:255.255.248.0
 inet6 addr: fe80::250:8dff:fe94:714a/64 Scope:Link
 UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
 RX packets:172324 errors:0 dropped:0 overruns:0 frame:0
 TX packets:1904 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:12503150 (11.9 Mb) TX bytes:371462 (362.7 Kb)
eth1 Link encap:Ethernet HWaddr 00:50:8D:94:71:4B
 BROADCAST MULTICAST MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:1000
 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
 Interrupt:5 Base address:0xa000
lo Link encap:Local Loopback
 inet addr:127.0.0.1 Mask:255.0.0.0
 inet6 addr: ::1/128 Scope:Host
 UP LOOPBACK RUNNING MTU:16436 Metric:1
 RX packets:502 errors:0 dropped:0 overruns:0 frame:0
 TX packets:502 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:49132 (47.9 Kb) TX bytes:49132 (47.9 Kb)
peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
 inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
 UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
 RX packets:172405 errors:0 dropped:0 overruns:0 frame:0
 TX packets:1953 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:1000
 RX bytes:12507544 (11.9 Mb) TX bytes:377357 (368.5 Kb)
 Interrupt:11 Base address:0x4000
sit0 Link encap:IPv6-in-IPv4
 NOARP MTU:1480 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
tun0 Link encap:Ethernet HWaddr FE:AE:66:79:18:13
 inet6 addr: fe80::fcae:66ff:fe79:1813/64 Scope:Link
 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
 RX packets:31 errors:0 dropped:0 overruns:0 frame:0
 TX packets:843 errors:0 dropped:0 overruns:2 carrier:0
 collisions:0 txqueuelen:500
 RX bytes:4101 (4.0 Kb) TX bytes:52246 (51.0 Kb)
veth1 Link encap:Ethernet HWaddr 00:00:00:00:00:00
 BROADCAST MULTICAST MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
veth2 Link encap:Ethernet HWaddr 00:00:00:00:00:00
 BROADCAST MULTICAST MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
veth3 Link encap:Ethernet HWaddr 00:00:00:00:00:00
 BROADCAST MULTICAST MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
veth4 Link encap:Ethernet HWaddr 00:00:00:00:00:00
 BROADCAST MULTICAST MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
veth5 Link encap:Ethernet HWaddr 00:00:00:00:00:00
 BROADCAST MULTICAST MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
veth6 Link encap:Ethernet HWaddr 00:00:00:00:00:00
 BROADCAST MULTICAST MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
veth7 Link encap:Ethernet HWaddr 00:00:00:00:00:00
 BROADCAST MULTICAST MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
 inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
 UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
 RX packets:1904 errors:0 dropped:0 overruns:0 frame:0
 TX packets:172324 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:371462 (362.7 Kb) TX bytes:12503150 (11.9 Mb)
vif0.1 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
 BROADCAST MULTICAST MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
vif0.2 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
 BROADCAST MULTICAST MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
vif0.3 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
 BROADCAST MULTICAST MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
vif0.4 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
 BROADCAST MULTICAST MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
vif0.5 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
 BROADCAST MULTICAST MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
vif0.6 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
 BROADCAST MULTICAST MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
vif0.7 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
 BROADCAST MULTICAST MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
vif2.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
 inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
 UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
 RX packets:6 errors:0 dropped:0 overruns:0 frame:0
 TX packets:148584 errors:0 dropped:1800 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:468 (468.0 b) TX bytes:9013081 (8.5 Mb)
vif2.1 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
 inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
 UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:150390 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
vif3.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
 inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
 UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:861 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
xenbr0 Link encap:Ethernet HWaddr FE:AE:66:79:18:13
 inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
 UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
 RX packets:170009 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:7939155 (7.5 Mb) TX bytes:0 (0.0 b)
I'll be happy to provide any other information to help identify the issue.
Best regards,
-Eugene
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date: [Xen-users] Status of frequency scaling , Stephan Seitz
Next by Date: Re: [Xen-users] Error: Device 2049 (vbd) could not be connected. Hotplug scripts not working., Error: Device 0 (vif) could not be connected. Hotplug scripts not working. , Josef
Previous by Thread: [Xen-users] Status of frequency scaling , Stephan Seitz
Next by Thread: Re: [Xen-users] Need help setting up guest's networking - update , Yevgeniy Goldberg
Indexes: [Date] [Thread] [Top] [All Lists]

Copyright ©, Citrix Systems Inc. All rights reserved. Legal and Privacy
Citrix This site is hosted by Citrix

AltStyle によって変換されたページ (->オリジナル) /