Hiamal Llanos wrote:
> Hi!
>
> On 10/1/06, *John Smith* <netman1@xxxxxxx <mailto:netman1@xxxxxxx>> wrote:
>
> Hiamal Llanos wrote:
> > Hi,
> >
> > I have problems getting xenbr0 up in dom0 and which means that I don't
> > have any network interface in domU.
> > I tested different solutions presented on the list but none of those
> > worked for me :-(
>
>
> ...
>
> Hi Hiamal,
>
> try putting netloop in your /etc/modules and restarting. If
> it still does not work, run /etc/xen/scripts/network-<your flavour>
> manually.
>
>
> Thanks John, that got me a bit further.
>
> Now I have vif0.0 but no xenbr0. To get it working correctly I have to
> do the following, after a reboot:
>
> $ sudo /etc/init.d/xendomains stop
> $ sudo /etc/init.d/xend stop
> $ sudo /etc/xen/scripts/network-bridge stop
> $ sudo /etc/xen/scripts/network-bridge start vif0.0
> $ sudo /etc/init.d/xend start
> $ sudo /etc/init.d/xendomains start
>
> So now I have peth0, vif0.0 and xenbr0
> And addind vif = [''] to /etc/xen/sarge gawe my back eth0 on domU.
>
> But...wy dosn't xenbr0 get createt on system boot? What I'm missing?
> Must I change something in /etc/xen/xend- config.sxp?:
>
> (logfile /var/log/xen/xend.log)
> (loglevel DEBUG)
> (xend-http-server yes)
> (xend-relocation-server yes)
> (xend-port 8000)
> (xend-relocation-port 8002)
> (xend-address localhost)
> (xend-relocation-address localhost)
> (network-script network-dummy)
> (network-script 'network-bridge netdev=eth0')
> (network-script 'network-bridge bridge=xenbr0')
> (vif-script vif-bridge)
> (dom0-min-mem 64)
> (dom0-cpus 0)
>
>
>
> Thanks
> Hiamal
> **
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users 
Hiamal,
 I think those network-script entries in your config are
conflicting: as far as I know you can only have one.
 Here is my xen-config.sxp;
(xend-relocation-server no)
(xend-relocation-hosts-allow '')
(network-script 'network-bridge netdev=eth0')
(vif-script vif-bridge)
(dom0-min-mem 196)
(dom0-cpus 0)
Sincerely,
Jan.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users