Hi All,
Now that I've got my domU running under OpenSUSE 10.0 I have an issue with 
setting up eth0 in the domU.
The xenbr0 bridge is setup correctly in the dom0:
# mnemosyne:/etc/xen # brctl show
bridge name bridge id STP enabled interfaces
xenbr0 8000.feffffffffff no vif0.0
 peth0
 vif4.0
However, there is only the lo interface in domU:
xenos10:/etc/sysconfig/network # ifconfig
lo Link encap:Local Loopback
 inet addr:127.0.0.1 Mask:255.0.0.0
 inet6 addr: ::1/128 Scope:Host
 UP LOOPBACK RUNNING MTU:16436 Metric:1
 RX packets:13 errors:0 dropped:0 overruns:0 frame:0
 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:1135 (1.1 Kb) TX bytes:1135 (1.1 Kb)
The contents of /etc/sysconfig/network in the domU is:
xenos10:/etc/sysconfig/network # ls
. config if-down.d ifcfg-lo ifroute-lo scripts
. dhcp if-up.d ifcfg.template providers wireless
However, executing rcnetwork restart in the domU produces the following:
xenos10:/etc/sysconfig/network # rcnetwork restart
Shutting down network interfaces:
 eth1
 eth1 No configuration found for eth1
 Nevertheless the interface will be shut down.
 eth1 configuration: done
 veth0
 veth0 No configuration found for veth0
 Nevertheless the interface will be shut down.
 veth0 configuration: done
 veth1
 veth1 No configuration found for veth1
 Nevertheless the interface will be shut down.
 veth1 configuration: done
 veth2
 veth2 No configuration found for veth2
 Nevertheless the interface will be shut down.
 veth2 configuration: done
 veth3
 veth3 No configuration found for veth3
 Nevertheless the interface will be shut down.
 veth3 configuration: done
 veth4
 veth4 No configuration found for veth4
 Nevertheless the interface will be shut down.
 veth4 configuration: done
 veth5
 veth5 No configuration found for veth5
 Nevertheless the interface will be shut down.
 veth5 configuration: done
 veth6
 veth6 No configuration found for veth6
 Nevertheless the interface will be shut down.
 veth6 configuration: done
 veth7
 veth7 No configuration found for veth7
 Nevertheless the interface will be shut down.
 veth7 configuration: done
 vif0.0
 vif0.0 No configuration found for vif0.0
 Nevertheless the interface will be shut down.
 vif0.0 configuration: done
 vif0.1
 vif0.1 No configuration found for vif0.1
 Nevertheless the interface will be shut down.
 vif0.1 configuration: done
 vif0.2
 vif0.2 No configuration found for vif0.2
 Nevertheless the interface will be shut down.
 vif0.2 configuration: done
 vif0.3
 vif0.3 No configuration found for vif0.3
 Nevertheless the interface will be shut down.
 vif0.3 configuration: done
 vif0.4
 vif0.4 No configuration found for vif0.4
 Nevertheless the interface will be shut down.
 vif0.4 configuration: done
 vif0.5
 vif0.5 No configuration found for vif0.5
 Nevertheless the interface will be shut down.
 vif0.5 configuration: done
 vif0.6
 vif0.6 No configuration found for vif0.6
 Nevertheless the interface will be shut down.
 vif0.6 configuration: done
 vif0.7
 vif0.7 No configuration found for vif0.7
 Nevertheless the interface will be shut down.
 vif0.7 configuration: done
Shutting down service network . . . . . . . . . . . . . done.
Setting up network interfaces:
 lo
 lo IP address: 127.0.0.1/8 done
 eth1
 eth1 No configuration found for eth1 unused
 veth0
 veth0 No configuration found for veth0 unused
 veth1
 veth1 No configuration found for veth1 unused
 veth2
 veth2 No configuration found for veth2 unused
 veth3
 veth3 No configuration found for veth3 unused
 veth4
 veth4 No configuration found for veth4 unused
 veth5
 veth5 No configuration found for veth5 unused
 veth6
 veth6 No configuration found for veth6 unused
 veth7
 veth7 No configuration found for veth7 unused
 vif0.0
 vif0.0 No configuration found for vif0.0 unused
 vif0.1
 vif0.1 No configuration found for vif0.1 unused
 vif0.2
 vif0.2 No configuration found for vif0.2 unused
 vif0.3
 vif0.3 No configuration found for vif0.3 unused
 vif0.4
 vif0.4 No configuration found for vif0.4 unused
 vif0.5
 vif0.5 No configuration found for vif0.5 unused
 vif0.6
 vif0.6 No configuration found for vif0.6 unused
 vif0.7
 vif0.7 No configuration found for vif0.7 unused
Setting up service network . . . . . . . . . . . . . . done.
Is this normal?
I have tried using ifconfig eth0 192.168.0.3 up in the domU but get an error 
that the device does not exist.
I thought that a network interface would be created in the domU due to the vif 
line in the domU config file?
How can I create eth0 in the domU?
Thanks again,
Steve.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users