As I said previously. After the patch made with hand in the related files,
I am following this topic:
http://lists.xensource.com/archives/html/xen-devel/2005-06/msg00691.html

Good luck,

--
Leonardo Pinto
listas#openlogic dot com br


> I am using the custom vif names now inside domU config. However while
> booting up and shutting down domU, i see this inside /var/log/messages in
> dom0
>
> Jan 6 18:54:20 xen net.agent[8922]: remove event not handled
>
> Jan 6 18:54:36 xen hald[4869]: Timed out waiting for hotplug event 1148.
> Rebasing to 1149
> Jan 6 18:54:37 xen hal.hotplug[9720]: timout(10000 ms) waiting for
> /class/net/vif3.0
>
> This is the third time a domU has been booted on this machine so i can
> understand the vif3.0, however i have put a custom name for the vifname as
> vm01.
>
> ifconfig from dom0
>
> eth0 Link encap:Ethernet HWaddr 00:08:A1:50:FA:19
> inet addr:192.168.1.250 Bcast: 192.168.1.255 Mask:
> 255.255.255.0
> inet6 addr: fe80::208:a1ff:fe50:fa19/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:7828 errors:0 dropped:0 overruns:0 frame:0
> TX packets:6329 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:3537327 ( 3.3 MiB) TX bytes:835757 (816.1 KiB)
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> inet6 addr: ::1/128 Scope:Host
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:1 errors:0 dropped:0 overruns:0 frame:0
> TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:76 (76.0 b) TX bytes:76 (76.0 b)
>
> peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
> inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
> UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1
> RX packets:7811 errors:0 dropped:0 overruns:0 frame:0
> TX packets:6449 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:3548430 ( 3.3 MiB) TX bytes:859382 (839.2 KiB)
> Interrupt:16 Base address:0xa000
>
> vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
> inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:6332 errors:0 dropped:0 overruns:0 frame:0
> TX packets:7830 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:837371 (817.7 KiB) TX bytes:3537471 (3.3 MiB)
>
> vm01 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
> inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:7 errors:0 dropped:0 overruns:0 frame:0
> TX packets:55 errors:0 dropped:14 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:762 (762.0 b) TX bytes:11140 (10.8 KiB)
>
> xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
> inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:341 errors:0 dropped:0 overruns:0 frame:0
> TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:31190 ( 30.4 KiB) TX bytes:378 ( 378.0 b)
>
> ifconfig from inside domU
>
> eth0 Link encap:Ethernet HWaddr AA:00:00:18:98:FB
> inet addr:192.168.1.105 Bcast:192.168.1.255
> Mask:255.255.255.0
> inet6 addr: fe80::a800:ff:fe18:98fb/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:56 errors:0 dropped:0 overruns:0 frame:0
> TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:11226 ( 10.9 KiB) TX bytes:762 (762.0 b)
>
> lo Link encap:Local Loopback
> inet addr: 127.0.0.1 Mask:255.0.0.0
> inet6 addr: ::1/128 Scope:Host
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
>
> Any help would be appreciated.


________________________________________________
Mensagem enviada usando OpenLogic WebMail 2.7.2