WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
Xen

xen-users

[Top] [All Lists]

[Xen-users] Network interrupts disable?

To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] Network interrupts disable?
From: takebe_akio@xxxxxxxxxxxxxx
Date: 2005年8月01日 21:47:10 +0900
Delivery-date: 2005年8月02日 09:43:18 +0000
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
Hi all
I got xen-unstable.hg, did a fresh hg pull today(08/01).
Then I built and installed xen-unstable.
I can boot up Xen and Dom0. (DomU didn't create.)
But a network of Dom0 cannot be connected.
How should I do?
I use RTL-8139 network card, and 8139too.
The following message is shown by "dmesg |tail".
======================================================
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timeout, status 0c 0005 c07f media 10.
eth0: Tx queue start entry 4 dirty entry 0.
eth0: Tx descriptor 0 is 0008a05b. (queue head)
eth0: Tx descriptor 1 is 0008a07c.
eth0: Tx descriptor 2 is 0008a04e.
eth0: Tx descriptor 3 is 0008a05b.
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
======================================================
So, I checked /proc/interrupts and network interrupts didn't count. 
======================================================
 CPU0 
 1: 0 Phys-irq i8042
 8: 0 Phys-irq rtc
 9: 0 Phys-irq acpi
 12: 0 Phys-irq i8042
 14: 3683 Phys-irq ide0
 15: 1728 Phys-irq ide1
 17: 0 Phys-irq yenta, eth0
 18: 0 Phys-irq SiS SI7012, SiS SI7013 Modem, yenta
 19: 0 Phys-irq ohci1394
 20: 0 Phys-irq ohci_hcd:usb2
 21: 0 Phys-irq ohci_hcd:usb3
 22: 0 Phys-irq ohci_hcd:usb4
 23: 0 Phys-irq ehci_hcd:usb1
256: 0 Dynamic-irq ctrl-if
257: 12811 Dynamic-irq timer0
258: 0 Dynamic-irq resched0
259: 0 Dynamic-irq callfunc0
260: 0 Dynamic-irq console
261: 0 Dynamic-irq net-be-dbg
NMI: 0 
LOC: 0 
ERR: 0
MIS: 0
======================================================
Why interrupts of eth0 isn't counted?
Could anyone help me.
The result of lsmod and ifconfig is put as follows. 
 o lsmod
 ======================================================
 Module Size Used by
 md5 8448 1 
 ipv6 292928 8 
 autofs4 25604 2 
 rfcomm 52504 0 
 l2cap 37120 5 rfcomm
 bluetooth 62468 4 rfcomm,l2cap
 sunrpc 154308 1 
 video 20740 0 
 thermal 18056 0 
 processor 22944 1 thermal
 fan 9092 0 
 button 11024 0 
 battery 13956 0 
 ac 9220 0 
 ohci1394 42420 0 
 ieee1394 313688 1 ohci1394
 yenta_socket 28168 0 
 rsrc_nonstatic 18816 1 yenta_socket
 pcmcia_core 58276 2 yenta_socket,rsrc_nonstatic
 ohci_hcd 23812 0 
 ehci_hcd 39688 0 
 i2c_sis96x 10116 0 
 i2c_core 27264 1 i2c_sis96x
 snd_intel8x0m 23748 0 
 snd_intel8x0 38336 0 
 snd_ac97_codec 87296 2 snd_intel8x0m,snd_intel8x0
 snd_seq_dummy 8196 0 
 snd_seq_oss 41472 0 
 snd_seq_midi_event 12544 1 snd_seq_oss
 snd_seq 62480 5 snd_seq_dummy,snd_seq_oss,
snd_seq_midi_event
 snd_seq_device 13580 3 snd_seq_dummy,snd_seq_oss,
snd_seq
 snd_pcm_oss 60704 0 
 snd_mixer_oss 25088 1 snd_pcm_oss
 snd_pcm 100228 4 snd_intel8x0m,snd_intel8x0,
snd_ac97_codec,snd_pcm_oss
 snd_timer 31236 2 snd_seq,snd_pcm
 snd 60260 10 snd_intel8x0m,snd_intel8x0,
snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,
snd_mixer_oss,snd_pcm,snd_timer
 soundcore 14304 1 snd
 snd_page_alloc 14724 3 snd_intel8x0m,snd_intel8x0,
snd_pcm
 8139too 33152 0 
 mii 10240 1 8139too
 ext3 151048 2 
 jbd 70552 1 ext3
 dm_mod 67748 1
 ======================================================
 
 o ifconfig -a
 ======================================================
 eth0 Link encap:Ethernet HWaddr 00:40:D0:34:B8:BC 
 inet addr:10.124.50.61 Bcast:10.124.50.255 Mask:255.
255.255.0
 inet6 addr: fe80::240:d0ff:fe34:b8bc/64 Scope:Link
 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:1000 
 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
 Interrupt:17 Base address:0xe400 
 lo Link encap:Local Loopback 
 inet addr:127.0.0.1 Mask:255.0.0.0
 inet6 addr: ::1/128 Scope:Host
 UP LOOPBACK RUNNING MTU:16436 Metric:1
 RX packets:14 errors:0 dropped:0 overruns:0 frame:0
 TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0 
 RX bytes:1148 (1.1 KiB) TX bytes:1148 (1.1 KiB)
 sit0 Link encap:IPv6-in-IPv4 
 NOARP MTU:1480 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0 
 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
 veth0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 
 BROADCAST MULTICAST MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0 
 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
 vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF 
 BROADCAST MULTICAST MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0 
 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
 ======================================================
 
Thanks,
AKio
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date: [Xen-users] Network interrupts disable? , takebe_akio
Next by Date: RE: [Xen-users] Network interrupts disable? , Ian Pratt
Previous by Thread: [Xen-users] Network interrupts disable? , takebe_akio
Next by Thread: RE: [Xen-users] Network interrupts disable? , Ian Pratt
Indexes: [Date] [Thread] [Top] [All Lists]

Copyright ©, Citrix Systems Inc. All rights reserved. Legal and Privacy
Citrix This site is hosted by Citrix

AltStyle によって変換されたページ (->オリジナル) /