On 14 Jan 2005, at 22:00, Anthony Liguori wrote:
Symptom:
When using a udev-based dom0, if you try to create a domU with a
virtual
sda device and you do not have a local scsi device xm create fails.
Fix:
When using udev, only the device nodes needed are made. The follow
patch changes Xend to return a device number based on:
http://www.lanana.org/docs/device-list/devices.txt
For sd and hd devices if stat() fails. It was tested against both
2.0.2
and 2.0.3.
Another solution is to tell udev to automatically create /dev/sda1
every time it gets started:
# mknod /etc/udev/devices b 8 1
When udev starts, all device files inside /etc/udev/devices are
automatically copied to /dev, with no further configuration or
triggering of hotplug or coldplug events.
NOTE: This is what I use for VMware, which needs a lot of /dev/vm*
devices to function properly: I moved all VMware-specific device files
into /etc/udev/devices so when udev starts, those files are copied back
to /dev.
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel