The 101E manual does not show how to install a AM filter only a CW one. I put a 101E filter board in a 101E that had a AM filter on it that worked perfect in the 101E it came out of. When I inter-changed boards they were not compatible each other. the AM 101E was mute in the "AM" mode and the other one still received narrow "AM" even with the AM filter on the board. I.E. it was still using the SSB filter to receive. it seems some change must be made to the radio itself for the AM filter to work on a 101E? Does Inrad provide this info? Dan ----- Original Message ----- From: "Art Searle W2NRA" <w2nra at optonline.net> To: "cwoodside" <n1muq at optonline.net> Cc: <yaesu at mailman.qth.net> Sent: Saturday, March 12, 2005 6:55 AM Subject: Re: [Yaesu] FT101E AM Filter >> InRad makes it at: >> http://www.qth.com/inrad/ >> 73, > Art > W2NRA >> cwoodside wrote: >> These seem to be very hard to find. But I am still looking so I thought I >> would ask again. Looking for the AM filter for a Yaesu FT 101E { >> *XF-30B } Thanks Charlie N1MUQ >> * >> _______________________________________________ >> Yaesu mailing list >> Yaesu at mailman.qth.net >> http://mailman.qth.net/mailman/listinfo/yaesu >>>>>> _______________________________________________ > Yaesu mailing list > Yaesu at mailman.qth.net > http://mailman.qth.net/mailman/listinfo/yaesu