[Yaesu] ft-726r question
[email protected]
[email protected]
2003年8月17日 20:42:05 -0400
Made a break out box for trigering the transmit relay on each of my 4 outboard amps. used a small enclosure with 4 rca jacks. eack jack wired{ center pin} to the correct pin on the din plug and all the common grounds to pin 1 on the din plug. plugged it into the 736r and figured when I hit the ptt on the mic the ohm meter should show a solid short across the rca jack... not so, shows the circuit is not a dead short to ground,but having a floating resistance, short of a dead ground . The directions are on page 20 of the manual.. Iam I reading these wrong ? I figured when the ptt is hit the rca's should show a dead short to ground.
any help ,would be greatful.
take care
dale k8peo