[LOGic] NEW LOGIC ERROR? LOSS OF CAT

Wed Sep 19 11:32:49 EDT 2012

Ha! You've won the lottery!
73
Dan
K0DAN
-----Original Message----- 
From: Dennis Hevener
Sent: September 19, 2012 08:55 AM
To: logic at mailman.qth.net
Cc: K0DAN ; aa4hp at titustek.com ; snance at charter.net
Subject: Re: [LOGic] NEW LOGIC ERROR? LOSS OF CAT
No sweat. Glad it's someone else's fault for a change hihi.
73,
Dennis WN4AZY
On 9/18/2012 8:25 PM, K0DAN wrote:
> My apologies to Dennis for pointing the finger at LOGIC. Apparently my 
> DDUTIL program was working fine, but its config file was glitched, causing 
> a too-long string to be sent to LOGIC's CAT routine, causing the error.
>> I heard back from Steve Nance (K5FR), author of DDUTIL, who sent me the 
> following (EASY!) reset routine for DUTIL. It took about 2 minutes and 
> suddenly LOGIC + DDUTIL + Flex PSDR were all talking & working happily 
> together again! At the moment it appears PROBLEM SOLVED!
>> Thanks to all for their input.
>> 73
>> Dan
> K0DAN
>> From: Steve Nance
> Sent: September 18, 2012 01:33 PM
> To: 'K0DAN'
> Subject: RE: DDUTIL CHANGES?
>> Another remote possibility is a corrupt DDUtil user settings file. Use 
> this procedure to reset the user settings file.
> 1. From the Options menu select "Profile Save" and give it a name.
> 2. Close DDUtil
> 3. Open the DDUtil install folder (usually C:\DDUtil).
> 4. Execute (double-click) the "DeleteUserConfig.bat" file.
> 5. Start DDUtil (will have default settings).
> 6. Open the "Option" menu and select "Profile Recall" and select the 
> file you saved.
> If this didn't fix the problem I would post a message to the DDUtil 
> reflector and see if anyone else is having a problem.
> 73, Steve K5FR
>> -----Original Message-----
> From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
> On Behalf Of K0DAN
> Sent: Tuesday, September 18, 2012 1:51 PM
> To: logic at mailman.qth.net
> Subject: [LOGic] NEW LOGIC ERROR? LOSS OF CAT
>>> This is a question for LOGic users who are using a combination of Flex 
> PSDR,
> LOGic, and DDUTIL.
>> I am running DDUTIL 2.1.0.04, PSDR 2.3.5, and LOGic 8 on a WIN7 PC. I have
> been running these for several years with no changes (except for 
> occasional
> DDUTIL & PSDR updates).
>> About a week or two ago I discovered that my LOGic is no longer responding
> to CAT commands. Typical reboot, clean, and restart procedures do not 
> change
> anything.
>> When LOGic starts (and tries to communicate via the serial ports) I get 
> the
> following error:
>> ERROR 1881 "Error with label 1 - Caption: String is too long to fit" has
> occurred in the program FORM1.INIT, Line 4.
>> If I ignore the error and continue, the software will start but will not
> report rig activity and when I try to reset the CAT interface I get the
> following/similar error:
>> "Error with label 1 - Caption: String is too long to fit"
>> Have others seen this issue? I am trying to find out if it is being caused
> by LOGic or DDUTIL, and looking for ideas what might be causing this error
> or how I can further troubleshoot?
>> Thanks and 73
>> Dan
> K0DAN
> ______________________________________________________________
> LOGic mailing list
> Home: http://mailman.qth.net/mailman/listinfo/logic
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:LOGic at mailman.qth.net
>> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html