That should do the trick When you upload to LoTW or E-QSL you can define which qso's are both uploaded or downloaded or'all'. Lionel W4/G5LP -----Original Message----- From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net] On Behalf Of Robie Elms Sent: 05 December 2009 23:13 To: 'LOGic is open to all radio amateurs for discussion of LOGic logging program' Subject: Re: [LOGic] QSOs from Previous Call Gil, I believe you do this by changing the "operator". This is found on the Log form setup page, under the general tab. Take a look and see what you think. 73, Robie - AJ4F -----Original Message----- From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net] On Behalf Of Gil Stauffer Sent: Saturday, December 05, 2009 2:14 PM To: logic at mailman.qth.net Subject: [LOGic] QSOs from Previous Call I've searched through HELP and the LOGic 8 manual but can not locate instructions about this issue. I would like to begin entering contacts made while I had a previous call sign. I lived in the same QTH so it is my understanding the contacts are valid for various awards. How can I integrate these contacts with my current log but from a different call. I would then like to upload the contacts to LOTW? Has anyone had a similar issue? Gil WB3ESR ______________________________________________________________ LOGic mailing list Home: http://mailman.qth.net/mailman/listinfo/logic Help: http://mailman.qth.net/mmfaq.htm Post: mailto:LOGic at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ LOGic mailing list Home: http://mailman.qth.net/mailman/listinfo/logic Help: http://mailman.qth.net/mmfaq.htm Post: mailto:LOGic at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html