[LOGic] Callbooks Page Missing Info

Sun Aug 30 16:35:04 EDT 2009

Mine's working great now! Thanks, all, for the help.
Don't know why the editing here was stubborn, but it was.
Here's what worked:
1. Had to go download the DBF from YahooGroups 
(http://groups.yahoo.com/group/logic_software/files/). I, too, had trouble 
finding the group, perhaps because I have several log-in ID's (me at myISP.net, 
mycall at arrl.net, etc., etc.?) but eventually I found it. Curiously, I had to 
rejoin the group...probably another mutliple-ID issue.
2. Printed a screenshot of my CALLBOOKS window, clicking on the SETUP 
button. Makes reconfiguring your custom setups easier!
3. Shut down LOGIC.
4. Copied the newly downloaded callbooks.DBF to c:\LOGIC8\logdata
5. Run CLEAN
6. Restart LOGic, go to CALLBOOKS window, click on the SETUP button and edit 
features as you see fit
Try logging any call, spot log, etc., and QRZ works fine! Yessss!
Not sure why some users had smooth sailing and others didn't but this change 
seems to do the job.
Thanks again to all...
73
dan
k0dan
----- Original Message ----- 
From: "R Johnson" <k1vu at tmlp.com>
To: <logic at mailman.qth.net>
Sent: Sunday, August 30, 2009 11:13 AM
Subject: Re: [LOGic] Callbooks Page Missing Info
> Bill:
> I just changed my callbooks.dbf file following your directions (below).
> It me about 2 minuets and worked FB.
> I thought your directions were quite clear and understanable.
>> TNX es 73
> Bob, K1VU
>> At 20:32 8/29/2009, you wrote:
>>Dan - using www.qrz.com/db/(call) works ok in all respects here. It puts
>>name, city, state, etc etc in the main log Call, Name and Qth; also puts 
>>the
>>proper info into the Info form as well as the Log Brower. Not sure what 
>>you
>>are doing. Try this again:
>>Go to tools - advanced - Database Commands; then click on "Database
>>File" --> Open -->(your path to your LOGic directory) i.e.
>>C:\LOGic8\logdata\callbooks.DBF ; then again click on "Database Files" at
>>the top of the Database Command window, then click on --> Browse. The 
>>list
>>of all the callbook sources should appear along with the URL listings.
>>Change the the URL for QRZ to www.qrz.com/db/(call) . Finally, close out
>>the Database commands windows.
>>Hope it works for you. Bill N4iQ
>>>>>>----- Original Message ----- 
>>From: "K0DAN" <k0dan at comcast.net>
>>To: "LOGic is open to all radio amateurs for discussion of
>>LOGicloggingprogram" <logic at mailman.qth.net>
>>Sent: Saturday, August 29, 2009 7:43 PM
>>Subject: Re: [LOGic] Callbooks Page Missing Info
>>>>>>>I can't get either one to work. Using www.qrz.com/db/(call) the QRZ home
>>> page opens up, and the callsign appears in both of LOGIC's upper 
>>> callbook
>>> &
>>> call windows, but the callsign is not plugged into the browser window, 
>>> and
>>> hence the browser does not retrieve any info from qrz.com.
>>>>>> 73
>>> dan
>>> k0dan
>>>>> ______________________________________________________________
> LOGic mailing list
> Home: http://mailman.qth.net/mailman/listinfo/logic
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:LOGic at mailman.qth.net
>> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>