[LOGic] New Vista Machine

Tue Oct 14 10:52:18 EDT 2008

Undoubtedly... I'm not quite sure if the problems were the drives
themselves, or the PCI to SATA card, but the drives have been working fine
so far...
Ben
-----Original Message-----
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
On Behalf Of Charette, Douglas
Sent: Tuesday, October 14, 2008 7:48 AM
To: LOGic is open to all radio amateurs for discussion of LOGic logging
program
Subject: RE: [LOGic] New Vista Machine
You should probably send the details to Dennis, as I'm sure he'd like to
know about it.
73 Doug W5GA
-----Original Message-----
From: logic-bounces at mailman.qth.net
[mailto:logic-bounces at mailman.qth.net] On Behalf Of N6FM Ben
Sent: Tuesday, October 14, 2008 9:47 AM
To: 'LOGic is open to all radio amateurs for discussion of LOGic logging
program'
Subject: RE: [LOGic] New Vista Machine
Found it!!!
It apparently does not like SATA CD Rom drives (or at least the two that
I
have that are dissimilar models)for the purpose of entering the key
code..
Anyway, I connected a standard IDE drive and it worked fine...
Who'd a thunk it...
Thanks for the reply and help..
73
Ben
-----Original Message-----
From: logic-bounces at mailman.qth.net
[mailto:logic-bounces at mailman.qth.net]
On Behalf Of Charette, Douglas
Sent: Tuesday, October 14, 2008 6:44 AM
To: LOGic is open to all radio amateurs for discussion of LOGic logging
program
Subject: RE: [LOGic] New Vista Machine
Give Dennis a call and see if he has any insight, then. I'm out of
ideas.
73 Doug W5GA
-----Original Message-----
From: logic-bounces at mailman.qth.net
[mailto:logic-bounces at mailman.qth.net] On Behalf Of N6FM Ben
Sent: Tuesday, October 14, 2008 8:37 AM
To: 'LOGic is open to all radio amateurs for discussion of LOGic logging
program'
Subject: RE: [LOGic] New Vista Machine
On one drive it eventually pops out the CD, but nothing else, it still
shows
non-responding and I have to shut down windows wioth the power button
for it
to do anything. 
I am using SATA CD drives, perhaps I'll try a regular IDE drive. 
Ben
-----Original Message-----
From: logic-bounces at mailman.qth.net
[mailto:logic-bounces at mailman.qth.net]
On Behalf Of Charette, Douglas
Sent: Tuesday, October 14, 2008 6:32 AM
To: LOGic is open to all radio amateurs for discussion of LOGic logging
program
Subject: RE: [LOGic] New Vista Machine
After you enter the serial number, if it hangs hit the eject button on
the cd drive and it should continue.
73 Doug W5GA
-----Original Message-----
From: logic-bounces at mailman.qth.net
[mailto:logic-bounces at mailman.qth.net] On Behalf Of N6FM Ben
Sent: Monday, October 13, 2008 11:57 PM
To: 'LOGic is open to all radio amateurs for discussion of LOGic logging
program'
Subject: [LOGic] New Vista Machine
Attempting to install Logic on a new Machine. When I attempt to put in
the
serial number, it just hangs for several minutes. Dashes were included.
Tried:
Running as administrator
Using different CD ROM
I have to totally reboot to get out of it...
Anyone else have a problem like this?? 
 Thanks
Ben
_______________________________________________
LOGic mailing list
LOGic at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/logic
_______________________________________________
LOGic mailing list
LOGic at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/logic
_______________________________________________
LOGic mailing list
LOGic at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/logic
_______________________________________________
LOGic mailing list
LOGic at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/logic
_______________________________________________
LOGic mailing list
LOGic at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/logic
_______________________________________________
LOGic mailing list
LOGic at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/logic