[LOGic] LOGic - Remote control and port sharing

Sun Nov 30 15:35:34 EST 2008

Thanks Rich, I have TRX MGR but unfortunately it doesn't do all that
ARCP2000 does, nor all that I need.
73
Dan
K0DAN
----- Original Message ----- 
From: "Rich K." <richpdc at centurytel.net>
To: "'LOGic is open to all radio amateurs for discussion of LOGic logging
program'" <logic at mailman.qth.net>
Sent: Sunday, November 30, 2008 2:19 PM
Subject: RE: [LOGic] LOGic - Remote control and port sharing
> Instead of using Kenwood's ARCP2000 control software, spend the money and
> get TRX-Manager to control the radio(s). It will pass the radio info over
> to
> Logic easily and the two are partners in this process. Check out
> hosenose.com and see or trx-manager.com. I use them both... remote
> controlling and logging with the radio is easy.
>> Rich Kelly
> KB9RNO
>> -----Original Message-----
> From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
> On Behalf Of Mel Martin
> Sent: Sunday, November 30, 2008 12:53 PM
> To: LOGic is open to all radio amateurs for discussion of LOGic logging
> program
> Subject: Re: [LOGic] LOGic - Remote control and port sharing
>> You can't share serial ports... but you can create a second virtual port
> in parallel. Research Com0Com. This is a solution apparently, but I
> haven't used it.
>>> K0DAN wrote:
>> I have two rigs interfaced to LOGIC:
>> a) An FT1000MP using a derived USB-Serial port
>> b) A TS2000 using a "real" serial port
>> Right now every thing is in the hamshack, local control. All this works
>> fine.
>>>> I'm in the process of remoting the TS2000 via WIFI.
>> I'm using Kenwood's ARCP2000 control software, which requires a serial
> port
>> to interface the rig and PC (this steals the serial port from LOGIC).
>>>> Need another serial port so the TS2000 can talk to LOGIC while also
> talking
>> to the ARCP2000 software.
>>>> I searched the LOGIC archives but couldn't find any discussions on how to
>> share serial ports. Or add a USB hub plus more derived USB/Serial ports?
>>>> Any suggestions for "best way" to let the rig control software and LOGIC
>> talk to the TS2000 simultaneously? ("Best way" =
>> cheap/simple/inexpensive/reliable!)
>>>> Tnx
>> es 73
>> Dan
>> K0DAN
>>>> _______________________________________________
>> LOGic mailing list
>> LOGic at mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/logic
>>>> -- 
> Mel, VE2DC
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com
> Version: 8.0.176 / Virus Database: 270.9.11/1820 - Release Date:
> 11/29/2008
> 6:52 PM
>> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>