[Logic] Spot Log Reverts To Show All Mode

Sat Jan 8 15:45:25 EST 2005

Gee Hank maybe others are seeing this, but on this end all is working as it
should, although still haven't been running continuously for more than 4 hrs
or so.
Mine is not in show all mode and it continues to display only spots needed.
Others in the group may have comments or clues as to what's happening.
I downloaded v7.0.132 this morning, don't know what the differences were
between .131 and this but it seems fine.
Just happened to think that if you have filters set you might want to check
the help file as I think there was something about filters for unneeded
spots interfering with non-DXCC spots............heck, I got LOGic running
so here it is direct from the help file......."if you have filters set so
that unneeded country spots are not announced, this could interfere with
LOGic's spotting of non-DXCC awards such as prefixes, zones, etc."
Not sure what exactly the result of having the filters set would be, i.e.,
would it cause what your seeing, but maybe worth a check of your filtering.
A quick read of the "DX spotting" section may shed some other light as other
set-ups may be related.
An e-mail to Dennis may be worth while if the group has no other
suggestions.
73 de N8GLS, Brad
-----Original Message-----
From: logic-bounces at mailman.qth.net
[mailto:logic-bounces at mailman.qth.net]On Behalf Of Hank Phillips
Sent: Saturday, 08 January, 2005 2:58 PM
To: LOGic is open to all radio amateurs for discussion of LOGic logging
program.
Subject: RE: [Logic] Spot Log Reverts To Show All Mode
Brad,
I pulled down 7.0.132 the evening I received your posting, and it has been
running for a few days.
I am still seeing the problem a few times a day when running extended spot
displays, usually unattended. Still don't see any clue as to what might
trigger it.
73,
Hank
AA4HP
At 09:01 PM 1/5/2005 -0500, you wrote:
>Hi Hank,
>>I downloaded yesterday night v7.0.131 and have yet to notice this issue
>after a 4 hr run last night and about 2 hrs tonight.
>>>73 de N8GLS, Brad
>>>>-----Original Message-----
>From: logic-bounces at mailman.qth.net
>[mailto:logic-bounces at mailman.qth.net]On Behalf Of Hank Phillips
>Sent: Tuesday, 04 January, 2005 7:09 PM
>To: logic at mailman.qth.net
>Subject: [Logic] Spot Log Reverts To Show All Mode
>>>I just installed the latest update, version 7.0.130 (advertised as .129 on
>support site). There were lots of changes made to the spot log routines.
>>My machine can sit for long periods just cataloging spots without any
>operator input, and I run without "show all" almost exclusively. I usually
>clear the spot log right after starting Logic for the first time in a
>session.
>>Sporadically, it will begin displaying spots as though "show all" were
>checked. Toggling "show all" puts it back in the right behavior, but
>whether it stays in the "no show all" mode is unpredictable. Yesterday it
>ran for about eight hours without any problem, today it flipped twice in 45
>minutes.
>>Anybody seen anything like this?
>>Thanks and 73,
>>Hank
>AA4HP
>>>_______________________________________________
>LOGic mailing list
>LOGic at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/logic
>>>_______________________________________________
>LOGic mailing list
>LOGic at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/logic

_______________________________________________
LOGic mailing list
LOGic at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/logic