[Logic] Power - Carry Value Forward to New Record????

Fri Feb 25 15:43:45 EST 2005

You have a choice... Set a default power, or copy from previous.
You want to have a default for the first QSO when the program starts
then copy susequent QSO's? It's probably simpler the way it is.
________________
Mel, VE2DC 
-----Original Message-----
From: logic-bounces at mailman.qth.net
[mailto:logic-bounces at mailman.qth.net] On Behalf Of Carl Smidt
Sent: Friday, February 25, 2005 8:04 AM
To: LOGic is open to all radio amateurs for discussion of LOGic logging
program.
Subject: Re: [Logic] Power - Carry Value Forward to New Record????
Yes Mel, but I think that Mike wants to have the default power left as 
is.
However, when he enters a new power level in the logging screen while 
running a bunch of QSO at that power level, he would like to see that 
newly entered power level remain for that period until LOGic is powered 
up anew, then defaulting to his default setting.
It would be nice if that could be done, since many times when operating 
with different power levels one forgets to enter the proper one for the 
respective QSO's.
73, Carl VE9OV
----- Original Message ----- 
From: "Mel" <mel.martin at axare.mail.net>
To: "'LOGic is open to all radio amateurs for discussion of LOGic 
logging program.'" <logic at mailman.qth.net>
Sent: Friday, February 25, 2005 8:38 AM
Subject: RE: [Logic] Power - Carry Value Forward to New Record????
> Don't set a default power and it will work the way you want.
>>> -----Original Message-----
>> From: logic-bounces at mailman.qth.net 
>> [mailto:logic-bounces at mailman.qth.net] On Behalf Of Michael D Rand
>> Sent: February 25, 2005 05:59
>> To: logic at mailman.qth.net
>> Subject: [Logic] Power - Carry Value Forward to New Record????
>>>>>> HI All.
>>>> I'm using LOGic7 and have the default power level set at 100. 
>> However, I often use an amplifier and transmit at higher power 
>> levels. Once I tune
>> the amplifier and leave it on, I often use it for several
>> contacts. My
>> problem is that whenever I initiate an entry for a new
>> contact, the entry
>> in the power field reverts to 100. I would prefer that once
>> changed it
>> should carry forward the latest value entered. Even if with
>> is no default
>> for the initial log entry, that would be better; I would
>> prefer to make an
>> entry when I first turn on LOGic7, rather than have to
>> constantly change it
>> from the default when I operate with the amplifier on.
>>>> Have I overlooked something? Comments please.
>>>> Shalom from, to and for Israel,
>>>> Mike Rand, 4Z1MR / N7NPR 
>> _______________________________________________
>> LOGic mailing list
>> LOGic at mailman.qth.net http://mailman.qth.net/mailman/listinfo/logic
>>>> --
>> No virus found in this incoming message.
>> Checked by AVG Anti-Virus.
>> Version: 7.0.300 / Virus Database: 266.4.0 - Release Date: 2005年02月22日
>>>>>> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.300 / Virus Database: 266.4.0 - Release Date: 2005年02月22日
>>> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net http://mailman.qth.net/mailman/listinfo/logic
>>
_______________________________________________
LOGic mailing list
LOGic at mailman.qth.net http://mailman.qth.net/mailman/listinfo/logic
-- 
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.4.0 - Release Date: 2/22/2005
 
-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.4.0 - Release Date: 2/22/2005