[Logic] Radio Bandwith from Set Rig,spot log.
Terry Dummler
[email protected]
2004年4月26日 19:26:39 -0700
Larry
Be very careful when logging using any of the memory channels, like QMB or
other memory. Logic continues to log the last active VFO and not your
actual T/R frequency. This seems to be a shortcoming in Logic that does not
exist in TX Manager.
73
Terry,WQ7A
----- Original Message -----
From: "Larry Boyle" <[email protected]>
To: <[email protected]>
Sent: Monday, April 26, 2004 8:54 AM
Subject: Re: [Logic] Radio Bandwith from Set Rig,spot log.
> Hi Carl, What radio do you use?? I am using a ft1000D and looking in the
> manual for programing the radio there is no bandwidth data
> sent with SSB but with CW you have a choice of 2.4 or 500Hz. There is
> where the problem is. Dennis added a check box in a special
> release for me to try. You can select which filter group you want to use
> when setting rig in spot log. Standard is 2.4 or narrow is 500. It seems
> to work good so he may just add it in the next time. I would think you
> are not using a FT1000 or you would have the same thing. Cheers, Larry B.
>>> Carl Smidt wrote:
>> >Larry, it depends upon where you previously have set the filters manually
> >for each mode. Go to a cw spot and set the filter, then do likewise for a
> >phone spot. It will then repeat your previous settings automatically.
> >
> >I get 600 Hz for cw and 2.4kHz for phone, my preferences.
> >
> >73, Carl VE9OV
> >
> >
> >----- Original Message -----
> >From: "Larry Boyle" <[email protected]>
> >To: <[email protected]>
> >Sent: Sunday, April 18, 2004 1:45 AM
> >Subject: [Logic] Radio Bandwith from Set Rig,spot log.
> >
> >
> >
> >
> >>When doing a set radio from the spot log, is ther a way to tell the
> >>radio what filter you want depending on the mode?? I get 2.4K for CW and
> >>2.0K for SSB.
> >>Would be nice to get 500Hz for CW. Tnx Larry
> >>
> >>
> >>_______________________________________________
> >>LOGic mailing list
> >>[email protected]
> >>http://mailman.qth.net/mailman/listinfo/logic
> >>
> >>
> >>
> >
> >
> >
> >_______________________________________________
> >LOGic mailing list
> >[email protected]
> >http://mailman.qth.net/mailman/listinfo/logic
> >
> >
> >
> >
>> --
> Come visit our Parrots
> http://www.ruffledfeathersaviary.com
>>>> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
> text/plain (text body -- kept)
> text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment. Attachments are not allowed. To learn how
> to post in Plain-Text go to: http://www.expita.com/nomime.html ---
> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic
>