[Logic] Multiple Icom Rigs and CT-17 Level Converter
Mel
[email protected]
2003年10月27日 21:22:37 -0500
Depending on the radios you are using, this may not be a good idea...
Some older Icoms can freeze with off-speed packets on the bus.
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Julio Peralta
> Sent: October 27, 2003 20:51
> To: [email protected]
> Subject: Re: [Logic] Multiple Icom Rigs and CT-17 Level Converter
>>> Try changing the CI-V baud rate for one of the radios in both
> the software and in the menu of the radio. I'm using 2 PRO II
> and was able to get them to not track using this method. I'm
> also using 2 CI-V interfaces but I don't think you'll have to do that.
>> Let me know if it works...
>> Julio, W4HY
>> ----- Original Message -----
> From: "Bradford J. Williams - N8GLS" <[email protected]>
> To: "LOGic Reflector" <[email protected]>
> Sent: Monday, October 27, 2003 7:58 PM
> Subject: [Logic] Multiple Icom Rigs and CT-17 Level Converter
>>> > Hi Group,
> >
> > I now have two Icom rigs interfaced to LOGic through a single Icom
> > CT-17 Level Converter. Problem is that the frequency
> display in LOGic
> > will not track either Icom radio in real time UNLESS I have CI-V
> > Transceive enabled on both radios (of course, with CI-V
> enabled, the
> > radios track each other
> as
> > they should and display in real time in LOGic), BUT, I'm not using
> > them as
> a
> > separate radios in "transceive" mode, just two independent radios.
> >
> > Is there a bug in the Icom driver for LOGic that prevents the
> > frequency
> from
> > tracking in real time (knob spinning) unless CI-V transceive is
> > enabled on the radio(s)??
> >
> > RIgs are IC-756Pro II and IC-746Pro, LOGic is v6.0.617.
> >
> > Thanks,
> >
> > 73 de N8GLS, Brad
> >
> >
> > _______________________________________________
> > LOGic mailing list
> > [email protected] http://mailman.qth.net/mailman/listinfo/logic
> >
>>> _______________________________________________
> LOGic mailing list
> [email protected] http://mailman.qth.net/mailman/listinfo/logic
>