[Logic] Omni 6 question
Jim Brannigan
[email protected]
2003年1月02日 11:28:39 -0500
Dennis,
The other DB-25 pins are used to output band information and input from an
external tuning knob.
In addition to matching the rig ID, I find that running the OMNI-VI+ at 2400
baud and CdE OFF, yields the best results.
With CdE (continuous display) ON the interface is a little flaky. The only
thing that is missed is the screen frequency update as the tuning dial is
changed. When a contact is logged the correct frequency is also logged.
Happy New Year
Jim
> Dennis:
> The Omni 6 + requires a DB25 male connector for the
> serial port. Pins 2,3,7 are run straight through to the
> DB25F connector on the computer. On the DB25F
> on the computer, pins 4,5 are jumpered and pins
> 6,8,20 are jumpered.
> 73 and HNY de Greg, K7KJ
> Portland, OR
>> ----- Original Message -----
> From: "PDA" <[email protected]>
> To: <[email protected]>
> Sent: Thursday, 02 January, 2003 07:21
> Subject: [Logic] Omni 6 question
>>> > Hello--happy new year everyone.
> >
> > Can someone pse tell me what kind of serial
> > cable is needed to interface to an Omni 6
> > using it's built-in level converter?
> >
> > Thanks,
> >
> > Dennis
> > ================================
> > WHEN REPLYING, PLEASE INCLUDE A
> > COPY OF
> > THIS MESSAGE IN YOUR REPLY. THANK
> > YOU.
> >
> > Personal Database Applications
> > 1323 Center Dr.
> > Auburn, GA 30011-3318 USA
> >
> > 770-307-1511
> > 770-307-0760 Fax
> >
> > Check out our web page! Tell others about
> > it! Thanks.
> >
> > http://www.hosenose.com/
> >
> > _______________________________________________
> > LOGic mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/logic
> >
> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic