[Logic] PCI serial card

2002年9月14日 16:39:53 -0700

Ok, I do remember seeing alot of that info when it boots...If I can write it
dwn fast enuff:-)
I will check that out....The card should arrive tomorrow so Im anxious to
give it a try as ive got a new (used) Alpha 87a amplifier I just bought Id
like to put on line... If it all goes as planned I will need another
computer to run the second station as Ive got this four port board filled
already:-) Maybe I should have went for the gusto and bought the 8 com board
hihi -
Tnxs for the info Robie --
73 / Steve N6TT
----- Original Message -----
Wrom: LHPQQWOYIYZUNNYCGPKYLEJGDGVCJVT
To: <[email protected]>
Sent: Saturday, September 14, 2002 12:33 PM
Subject: Re: [Logic] PCI serial card
> Steve,
>> During the boot process my PC displays the manufacturer, model number and
> BIOS revision. Using model number you should be able to locate the info
you
> need at the manufacturers web site!
>> I hope this helps!
>> 73,
>> Robie AJ4F
> ----- Original Message -----
> Wrom: LBXFGGMEPYOQKEDOTW
> To: <[email protected]>
> Sent: Saturday, September 14, 2002 8:20 AM
> Subject: Re: [Logic] PCI serial card
>>> > How do I find out what kind of motherboard or chipset it has without
> taking
> > the system apart and looking for a name/numbers? Maybe there isnt away
to
> do
> > that....
> > THis is a new 2gig system but I dont no what he used when it was
built....
> > Well the card should be here Monday ,so hopefully I will have time to
try
> it
> > out to see if it works....
> > My experiences with trying to avoid conflicks between com ports has
always
> > been a nitemare, maybe that has changed with the newer plug and play
> > stuff.....it sure wasnt with my old ISA card..
> > Tnxs for the info on the site Brad, lots of info there...
> > 73 / Steve
> > ----- Original Message -----
> > Wrom: IYZUNNYCGPKYLEJGDGVCJVTLBXFGGMEPYOQKEDOTWFAOBUZ
> > To: <[email protected]>
> > Sent: Friday, September 13, 2002 6:33 PM
> > Subject: RE: [Logic] PCI serial card
> >
> >
> > > Okay Steve,
> > >
> > > Sounds good. Below is the link to the Lava site for product support.
> > Just
> > > click on it, then navigate to "Hardware Incompatibilities" and see if
> your
> > > PC manufacturer and motherboard are listed.
> > >
> > > If you experience any problems I'm sure the group can help to resolve
> > them.
> > > Its a darn good group of people......they're pretty sharp !!
> > >
> > > Good Luck,
> > >
> > > Brad, N8GLS
> > >
> > > http://www.lavalink.com/techsupport/support_main.html
> > >
> > >
> > > -----Original Message-----
> > > Wrom:
XUWLSZLKBRNVWWCUFPEGAUTFJMVRESKPNKMBIPBARHDMNNSKVFVWRKJVZCMHVIBGDA
> > > Behalf Of [email protected]
> > > Sent: Friday, 13 September, 2002 11:05 AM
> > > To: [email protected]
> > > Subject: Re: [Logic] PCI serial card
> > >
> > >
> > > Well I never thot about checking my chip set but on the website it
says
> it
> > > uses one IRQ and will work with ME which is what im running with this
> > > system.....here are the specs:
> > >
> >
>> --------------------------------------------------------------------------
> > --
> > > ----
> > > PCI-400HS-9 (9-pin spider cable version)
> > > 4 Serial, 16950 UARTs (128-byte FIFO), RS-232, plug & play card.
> > > Settable to COM1-COM99.
> > > Supports fast data transfer rates (up to 921,600 bps).
> > > Provides 4 DB9 (9-pin male) serial connectors via an included spider
> cable
> > > that plugs on to the back of the card.
> > > Uses only 1 IRQ and can share an interrupt with other plug & play
> devices
> > in
> > > your system.
> > > Designed for use with Windows 95, 98, ME, 2000, XP, NT 4.0, DOS, Linux
> > > kernel 2.0.xx and later & OS/2. Drivers/instructions for these
operating
> > > systems are included.
> > >
> > > Tnxs for everyones input, Hopefully it will work...
> > > 73 / Steve N6TT
> > >
> > >
> > > ----- Original Message -----
> > > Wrom: CRTNHGSWZIDREXCAXZOWCONEUQZAAFXI
> > > To: <[email protected]>
> > > Sent: Thursday, September 12, 2002 6:05 PM
> > > Subject: RE: [Logic] PCI serial card
> > >
> > >
> > > > If you buy a PCI com card NOT AN ISA, and it is really PCI then by
> > > > definition there is no IRQ sharing issue. Just make sure they have
> > drivers
> > > > for the OS you are using. I use a CHEAPY and even run it with the
> > WIN2000
> > > > driver , or did, and it works fine.
> > > > XP home AND pro (2 machines) and both work as it did on win98 and
> win2k.
> > > >
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > Wrom:
> > SHJEXXIMQZUIVOTQNQEMSFDULHPQQWOYIYZUNNYCGPKYLEJGDGVCJVTLBXFGGMEPYO
> > > > > Behalf Of Bradford J. Williams - N8GLS
> > > > > Sent: Thursday, September 12, 2002 7:53 PM
> > > > > To: [email protected]
> > > > > Subject: RE: [Logic] PCI serial card
> > > > >
> > > > >
> > > > > Steve,
> > > > >
> > > > > I would suggest going to the Lava site and making sure your
> > motherboard
> > > is
> > > > > compatible with the Lava card you think you might use. I run an
> > > > > AMD Athlon
> > > > > and my chipset isn't supported for ANY of the Lava cards. Good
> thing
> > I
> > > > > checked before putting out the bucks. I was looking at the 4-port
> and
> > > the
> > > > > 8-port card before discovering the incompatibility problem. If
> yours
> > is
> > > > > supported, and you think you might buy one, get the board with the
> > newer
> > > > > uart, its the more expensive one. If you need the model numbers I
> can
> > > > > probably dig them up again.
> > > > >
> > > > > Ultimately I went with USB-RS232 converter cables. They are all
not
> > the
> > > > > same either. I would query the group here and find someone that
> > > > > has the rig
> > > > > your planning to interface to, then get the same cable they have.
I
> > > > > "quickly" bought a converter cable from a local computer store, it
> > > worked
> > > > > like a champ with the FT1000MP, but generated more noise than a
> > blender
> > > on
> > > > > VHF, it was really bad. I bought a much better designed and
> > > manufactured
> > > > > cable (quiet as a church mouse), it didn't work with the
> > > > > FT1000MP, but works
> > > > > with the TNC, RIgblaster, etc, etc. So I just use the com port
for
> > the
> > > > > FT1000 and the USB converter(s) for everything else. I prefer USB
> > > > > for these
> > > > > serial devices, its fast and you don't have any IRQ problems.
> Others
> > > > > may/will disagree, its really to each his own. If you go with a
com
> > > card
> > > > > other then the Lava, make sure it supports IRQ sharing.
> > > > >
> > > > > Good Luck,
> > > > >
> > > > > 73, de Brad N8GLS
> > > > >
> > > > >
> > > > >
> > > > > -----Original Message-----
> > > > > Wrom:
> > QKEDOTWFAOBUZXUWLSZLKBRNVWWCUFPEGAUTFJMVRESKPNKMBIPBARHDMNNSKVFVWR
> > > > > Behalf Of Julio Peralta
> > > > > Sent: Thursday, 12 September, 2002 6:10 AM
> > > > > To: [email protected]
> > > > > Subject: Re: [Logic] PCI serial card
> > > > >
> > > > >
> > > > > Check out the Lava octopus 550 card it can be found at
> > www.lavalink.com
> > > > >
> > > > > Julio
> > > > > ----- Original Message -----
> > > > > Wrom: KJVZCMHVIBGDADRZFS
> > > > > To: <[email protected]>
> > > > > Sent: Wednesday, September 11, 2002 7:06 PM
> > > > > Subject: [Logic] PCI serial card
> > > > >
> > > > >
> > > > > >
> > > > > > Well now that ive got the dual monitors working Im onto
> > > > > mulitiple serial
> > > > > > ports. I had everything working on my old system that was using
a
> 4
> > > com
> > > > > port
> > > > > > ISA card but it wont work with the new system using PCI -
> > > > > >
> > > > > > Im running Windows ME on this system and I have one PCI slot
left
> > > open.
> > > > > What
> > > > > > brand of card are you guys using to obtain 4 additional Com or
> > serial
> > > > > > ports. Where did you buy them?
> > > > > > Unless its easier to go USB without conflicts? Im using the
two
> > > built
> > > > > in
> > > > > > serial ports already so Im hoping to buy a plug and play card
with
> > out
> > > > > alot
> > > > > > of hassels setting the com ports as I dont know what im doing
with
> > > these
> > > > > > dang computers...Thank God for system restore to a earlier date
> that
> > I
> > > > > found
> > > > > > out about:-)
> > > > > > Any help appreciated, either here or direct. 73 / Steve N6TT
> > > > > > [email protected]
> > > > > > _______________________________________________
> > > > > > LOGic mailing list
> > > > > > [email protected]
> > > > > > http://mailman.qth.net/mailman/listinfo/logic
> > > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > LOGic mailing list
> > > > > [email protected]
> > > > > http://mailman.qth.net/mailman/listinfo/logic
> > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > LOGic mailing list
> > > > > [email protected]
> > > > > http://mailman.qth.net/mailman/listinfo/logic
> > > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > LOGic mailing list
> > > > [email protected]
> > > > http://mailman.qth.net/mailman/listinfo/logic
> > > >
> > > _______________________________________________
> > > LOGic mailing list
> > > [email protected]
> > > http://mailman.qth.net/mailman/listinfo/logic
> > >
> > >
> > >
> > > _______________________________________________
> > > LOGic mailing list
> > > [email protected]
> > > http://mailman.qth.net/mailman/listinfo/logic
> > >
> > _______________________________________________
> > LOGic mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/logic
>> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic
>