Re[2]: [Logic] QSX Radio frequency

2002年3月23日 10:13:59 -0800

TRX does cause the split to occur, but if you watch the process, it looks as
if things are jumping around. TRX has to set one VFO, then makes the other
vfo active so that it can be set, sets that vfo, then switches VFO's back
and turns on split mode.
>From TRX manager's help file:

"ICOM transceivers communicate, by interrupt, frequency and mode changes but
other parameters (channel number, Split mode, VFO.) that are made on the
transceiver are not transmitted to the PC. The consequences are the
following :
- after the launching of TRX-Manager, some parameters are fixed by default
or unavailable. The display progressively becomes visible as commands are
sent from the PC. If necessary, rotate the dial tuning to display the
frequency,
- it is thus recommended to change the VFOs or to switch the SPLIT mode from
the PC."
Ben
----- Original Message -----
From: "NL7ZL" <[email protected]>
To: <[email protected]>
Sent: Saturday, March 23, 2002 09:42
Subject: Re[2]: [Logic] QSX Radio frequency
> I ran into this same problem using an ICOM 756 PRO. If you are using
> TRX-Manager then split works fine. I talked to the folks at Logic and
> they are aware of this. Their Icom driver does not appear to work as
> good as the on in TRX-Manager.
>>>> --
> 73,
>> Tom mailto:[email protected]
>> Saturday, March 23, 2002, 10:02:15 AM, you wrote:
>> BHN> On some radios, Icoms come to mind, the TX VFO frequency cannot be
read by
> BHN> the computer unless it is made the active VFO.
>> BHN> Ben
> BHN> ----- Original Message -----
> BHN> From: "Jim Brannigan" <[email protected]>
> BHN> To: <[email protected]>
> BHN> Sent: Saturday, March 23, 2002 08:54
> BHN> Subject: Re: [Logic] QSX Radio frequency
>>> >> A note to OMNI-VI+ users.
> >> I find that if I set the split from the radio, Logic6 will not log the
> BHN> Xmt.
> >> Freq.
> >> If I set the split from the log window, the Xmt. freq. is logged and
the
> >> packet QSX is sent.
> >> This is a problem with the Ten Tec software.
> >> Jim
> >>
> >> > Hi
> >> > The split Frequency works Fine for me and automatically on my
> >> > Kenwood 950 SDX that is connected to the computer via com 1 via
Kenwood
> >> > interface IF-232C
> >> > In other words if your radio is connected to the computer and logic
can
> >> > control it the split frequency works automatically
> >> >
> >> > 73 Eli 4z5is
> >> >
> >> > Stern Eli Advocate & Notary
> >> > ham radio callsign 4Z5 IS
> >> > ____________________________________
> >> > [email protected] OFFICE
> >> >
> >> > Haberman Dovev & Stern advocates & notarie Office
> >> > 51 Wizman St Tel Aviv Israel
> >> > FAX 00972 3 6962206
> >> >
> >> > [email protected] HOME
> >> >
> >> > 2 sagie st P.O.BOX 728 Reut ISRAEL 71908
> >> > Fax 00 972 8 9710010
> >> >
> >> >
> >> >
> >> > -----Original Message-----
> >> > From: [email protected]
[mailto:[email protected]]
> >> > On Behalf Of GilBaronW0MN
> >> > Sent: Saturday, March 23, 2002 3:14 PM
> >> > To: AA/Logic
> >> > Subject: [Logic] QSX Radio frequency
> >> >
> >> > In the log form there is a field for transmit frequency when
operating
> >> > split. Is there a way to automatically update this field to the exact
> >> > transmitted frequency as read from the rig rather than nothing or
> >> > offset?
> >> > I would like the program to read the other vfo and enter the
frequency
> >> > here.
> >> > It would make sending spots so much more useful. On clusters if you
have
> >> > QSX
> >> > (XMIT FREQ) then the spot logs will show this and logic users and
others
> >> > that have the feature can set the split automatically. Since the set
rig
> >> > automatically sets the split if on the spot log, that means it has
> >> > access
> >> > to the other vfo. I assume there should be a way to read it also. Is
> >> > there a
> >> > way to do that or do you have to manually enter this field?
> >> >
> >> >
> >> > Gil Baron http://webpages.charter.net/gbaron
> >> > 44.08208 N 92.51263 W 1055'
> >> > "Hierro candente, batir de repente"
> >> >
> >> >
> >> > _______________________________________________
> >> > LOGic mailing list
> >> > [email protected]
> >> > http://mailman.qth.net/mailman/listinfo/logic
> >> >
> >> > _______________________________________________
> >> > LOGic mailing list
> >> > [email protected]
> >> > http://mailman.qth.net/mailman/listinfo/logic
> >>
> >> _______________________________________________
> >> LOGic mailing list
> >> [email protected]
> >> http://mailman.qth.net/mailman/listinfo/logic
> >>
>> BHN> _______________________________________________
> BHN> LOGic mailing list
> BHN> [email protected]
> BHN> http://mailman.qth.net/mailman/listinfo/logic
>> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic
>