[Logic] QSX Radio frequency
stern eli
[email protected]
2002年3月23日 18:42:54 +0200
Hi
The split Frequency works Fine for me and automatically on my
Kenwood 950 SDX that is connected to the computer via com 1 via Kenwood
interface IF-232C
In other words if your radio is connected to the computer and logic can
control it the split frequency works automatically
73 Eli 4z5is
Stern Eli Advocate & Notary
ham radio callsign 4Z5 IS
____________________________________
[email protected] OFFICE
Haberman Dovev & Stern advocates & notarie Office
51 Wizman St Tel Aviv Israel
FAX 00972 3 6962206
[email protected] HOME
2 sagie st P.O.BOX 728 Reut ISRAEL 71908
Fax 00 972 8 9710010
-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of GilBaronW0MN
Sent: Saturday, March 23, 2002 3:14 PM
To: AA/Logic
Subject: [Logic] QSX Radio frequency
In the log form there is a field for transmit frequency when operating
split. Is there a way to automatically update this field to the exact
transmitted frequency as read from the rig rather than nothing or
offset?
I would like the program to read the other vfo and enter the frequency
here.
It would make sending spots so much more useful. On clusters if you have
QSX
(XMIT FREQ) then the spot logs will show this and logic users and others
that have the feature can set the split automatically. Since the set rig
automatically sets the split if on the spot log, that means it has
access
to the other vfo. I assume there should be a way to read it also. Is
there a
way to do that or do you have to manually enter this field?
Gil Baron http://webpages.charter.net/gbaron
44.08208 N 92.51263 W 1055'
"Hierro candente, batir de repente"
_______________________________________________
LOGic mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/logic