[Logic] Rotor setting

Sun, 7 Jul 2002 17:18:00 -0500

Hi all,
Not knocking the technology of automatic rotor control, but it
does have limitations especially in DXing. For real long haul
stuff, sometimes a skewed path, from a very unexpected direction
will yield the greatest signal. Another example is backscatter.
Yesterday, CY9DH came on 10M and started working a pileup.
When I pointed right at him he was gone. When I pointed SE
his signal came up and I worked him on BS.
Your mileage may vary,
Ken AB5A
-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of K1UQ
Sent: Friday, July 05, 2002 6:38 PM
To: [email protected]
Subject: Re: [Logic] Rotor setting
Sante,
you did not mention how you control your rotator (hardware) and what you
have for a rotator. If it is SARtek controller, here are my settings:
Rotor 1: SARtek 1B
Port: COM2
Baud Rate: 1200
Stop Bits: 1
Description: G-800SDX
Reverse: Selected
Rotor 2: (none)
Try selecting: Reset Radio & Rotor Interfaces.
GL & 73, Bill K1UQ
----- Original Message -----
From: "Sante - IK0HBN" <[email protected]>
To: <[email protected]>
Sent: Wednesday, July 03, 2002 2:08 AM
Subject: [Logic] Rotor setting
> Hi Logic users,
> I finally found a multi serial port to allow all the stuffs connected to
> Logic running. I have just one problem when recalling the ROTOR HEAD
window
> and trying to beam the antenna somewhere. Below the error message I got:
> "The last-selected log form doesn't have a Rotor Interface associated
with
> it. Please select a log form with an associated rotor interface".
>> Where I wrong? I have just selected the Rotor type and port in TOOLS >
> SETUP > STATION INFORMATION,MISC HAM SETUP, RIG, TNC....
>> Ps. It does not matter changing the COM port....
> Thanks in advance.
> Sante
>> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic
>
_______________________________________________
LOGic mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/logic
--- StripMime Report -- processed MIME parts ---
multipart/signed
 text/plain (text body -- kept)
 application/x-pkcs7-signature
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---