[Logic] Hint to use Logic 6 Keyer with RigBlaster and Kenwood Radio

2002年4月17日 11:12:18 -0500

If you are using the RigBlaster and the Logic Keyer with the COMM you must
be sure to set the RigBlaster to Auto. In Auto the VOX on the radio will
work normally but in VOX you will get a chattering relay if you use the PTT
line on the Logic interface. This is not a Logic problem but it is the way
the RigBlaster is switched. In Auto mode the mike is normally connected
except when a PTT signal from the radio is sent, then it gets disconnected
and the digital signal form the soundcard is sent.
Using the radio in FULL break with a PTT line is not a good idea.
The problem is that if you want to use the paddle to send you must use
break-in or the radio wont key up when you use the paddle and you will have
to do it manually.
I assume other automatic switching interfaces would work in a similar
manner.
I hope this helps.
Gil Baron http://webpages.charter.net/gbaron
44:04.925 N 92:30.758 W 1055'
"Hierro candente, batir de repente"