[Kenwood] Kenwood Mics FS

Mon Sep 2 16:59:34 EDT 2019

Kenwood Desk and Hand Microphones,
and HT Speaker Mic For Sale:
.
Kenwood MC-60 A Desk Microphone:
The Kenwood MC-60 A has been a popular desk mic
for many years. It has a communication type dynamic
unidirectional moving coil type mic element.
It features UP-DOWN tuning and a built-in pre-amp.
There is a PTT switch that also has a lock feature.
The mic impedance may be set for 50K ohms or
500 ohms.
The frequency response is 150 Hz-10 kHz with the
preamp off and 200 Hz- 7 kHz with the preamp on.
The heavy zinc die-cast base provides extra stability.
The preamp requires two AA cells which are mounted
through the bottom of the base, but are not needed
with most Kenwood rigs that provide a DC voltage
in the mic connector.
It has a round 8 pin plug.
Cosmetically, I do not find a scratch on this one;
there is slight wear near the PTT switch. This one
also has a nice large gray wind sock, along with
paper work for only 95ドル.
.
Alinco EMS-14 Deluxe Desk Microphone
Alinco EMS-14 Desk Microphones are a perfect
match for your Alinco base station, but it also has
the same connection as Kenwood and will work
great with Kenwood rigs. Round 8 pin connector.
It has a momentary PTT and a PTT lock, along with
up-down frequency buttons.
Your rig supplies power to the microphone element
and to the transmit-indicator LED. Microphone
audio contour is switchable for SSB/FM, and a gain
control under the base lets you adjust the microphone
output.
Non-skid rubber feet help to keep your microphone
right where you want it.
This one works 100% and looks like it just came out
of the box new. MSRP is 180,ドル but they usually
sell for 120ドル. Buy this one, with paper work, for 80ドル.
.
Kenwood MC-43 Hand Microphone:
The Kenwood MC-43 is the standard hand microphone
that comes with most of Kenwood's radios when new.
It has a round 8 pin connector, and is a dynamic
microphone.
It has up and down buttons on the top to change
frequency, as well as the PTT switch on the side.
This one works 100% and appears to be close
to new.
With paper work for only 35ドル.
.
Hand Microphone with round 8 pin plug for Kenwood, Alinco, etc.
This hand mic works great on most Kenwood rigs with the
round 8 pin connector, such as the TS-440, TM-241,
TM-2530, TW-4000, and others, including Alinco and ADI.
It says "Electret Condenser Mic" on the back, and
"Kenwood" on the front, with no model number.
Basically, this mic functions like an MC-43, with a couple
more features. It has the mic and PTT switch; it also has
up/down switches on the top. There are four "extra" buttons
labeled Call, VFO, MR, and PF. What these four buttons do
depends on the rig. There is also a "Lock" switch on the back.
Regardless if you use the four extra buttons or not, you
still have a mic that works like an MC-43.
This mic works fine, and looks like new. I am guessing it
came with a rig, and was immediately put in the drawer,
and never used. 30ドル
.
SMC-30 Speaker Microphone
Fits TH-21, TH-41, TH-215, TH-225, TH-415, TR-2600, and many
other Kenwood HTs. It has 3.5 mm and 2.5 mm plugs molded
together. It works fine, and is in good condition. 20ドル
.
I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.
.
Prices do not include shipping from Florida.
Thanks.
73,
Ken, W8EK
Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400
.
.