[Kenwood] Lightning protection wire antennas WA8OPR

Wed May 14 20:44:29 EDT 2014

I can tell you from first hand experience, that probably won't do it. I had a direct hit on my tower that came in through the feed line then jumped about 3 to 4" from the (ungrounded) switch to my DISCONNECTED main feed to the radios. Took out most everything on the desk then jumped to a file cabinet where it exited by the floor through the carpet into the ground (cement slab). You could trace the path. Very strong ozone odor and an electrical fire-like smell. Something you never forget. Saw the whole thing. Tower lit up light a giant light bulb (pretty cool actually). Now I make sure I ground everything.
73, Mike, K3RL
Sent from my iPad
> On May 14, 2014, at 12:11 PM, <k7bvo at cox.net> wrote:
>> Right..... (done in my best Bill Cosby voice imitation) roflmao
>> Bill
> K7BVO
>>> ---- Pete Lascell <plascell at verizon.net> wrote: 
>> If a lightning bolt can travel thousands of feet down to ground thru open 
>> air, do you think 2.5 inches will slow it down?
>>>>>> ----- Original Message ----- 
>> From: "Terry Clinard" <tclinard at hotmail.com>
>> To: <kenwood at mailman.qth.net>
>> Sent: Wednesday, May 14, 2014 11:25 AM
>> Subject: [Kenwood] Lightning protection wire antennas WA8OPR
>>>>>>> Can someone answer this question:
>>>>>>>>>>>> I have two 170 foot end feed wires in service for the bands. Both are up 
>>> at the top of tree line about 55 foot up.
>>>>>>>>>>>> Decided to purchase two old style heavy duty knife switches with porcelain 
>>> bases. The gap between the heavy duty copper contacts is a bout 2.5 
>>> inches.
>>>>>>>>>>>> The live end of the antenna wire is attached to the center knife rocker 
>>> and one of the side psots is connected to the transceiver. Obviously when 
>>> the knife switch is opened it disconnects the antenna. My question is 
>>> should the opposite knife post be attached to an earth ground? This then 
>>> puts the wire in the air directly to ground. Now with the antenna going 
>>> to true ground raises the negative potential of the wire in the air. I am 
>>> thinking that one does not want to do this, because now you have created a 
>>> high (55 foot) negative conductive path for lightning to target. Should 
>>> the antenna be grounded or simply turned off with the 2.5" knife switch 
>>> air gap?
>>>>>>>>>>>> Thanks Terry WA8OPR
>>>>>> ______________________________________________________________
>>> Kenwood mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/kenwood
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Kenwood at mailman.qth.net
>>>>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>> ______________________________________________________________
>> Kenwood mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/kenwood
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Kenwood at mailman.qth.net
>>>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
>> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html