[Kenwood] TS-130S

Wed Apr 3 14:05:09 EDT 2013

There is an antenna attenuation button on the right side bottom, make 
sure it is not selected.
Reid, W4UPD
On 4/3/2013 1:27 PM, David C. Hallam wrote:
> Point well taken about sensitivity. I will check.
>> There must be something missing from my service manual. It shows a 
> view of the IF board with the adjustment points, but nothing about 
> where any particular board is located.
>> David
> KW4DH
>> On 4/3/2013 1:06 PM, Clif Holland wrote:
>> Check the sensitivity first, it may be correct.
>>>> Open the service manual and it shows the IF unit under the bottom cover.
>>>> Clif Holland KA5IPF
>> www.avvid.com
>>>>>>>>>> ----- Original Message ----- From: "David C. Hallam" 
>> <dhallam at knology.net>
>> To: <Kenwood at mailman.qth.net>
>> Sent: Wednesday, April 03, 2013 11:56 AM
>> Subject: [Kenwood] TS-130S
>>>>>> I need to adjust the S meter on my TS-130S. It moves only on very strong
>> signals. Before I start doing anything, I would like to know how
>> accessible is the IF board. I have the service manual and equipment to
>> do the job, but if it requires a major disassembling effort to get to
>> the adjustment points, I will just live with it as is.
>>>> David
>> KW4DH
>>>