[Kenwood] Backup rig - advice requested.

Tue Nov 8 15:52:59 EST 2011

I use an Icom IC-740 with TR-4C as backup Rig.
Icom is connected to linear amplifier Heathkit SB-230 and TR-4C to FL-2100B .
As mobile I use a TS-50S 
Regards
Alberto YV-3-EDO/6
Sent using Blackberry Movilnet
-----Original Message-----
From: Tom Anderson <andersonww5l at sbcglobal.net>
Sender: kenwood-bounces at mailman.qth.net
Date: Tue, 8 Nov 2011 12:47:04 
To: <Kenwood at mailman.qth.net>; Bill Kuhn<BKuhn at kuhngroup.com>
Cc: <Ts-940 at yahoogroups.com>
Subject: Re: [Kenwood] Backup rig - advice requested.
I use a TS830s with the nondigital VFO to back up my TS 430SAT. I also have a 940SAT and a Yaesu 857.
Tom, WW5L
--- On Tue, 11/8/11, Bill Kuhn <BKuhn at kuhngroup.com> wrote:
> From: Bill Kuhn <BKuhn at kuhngroup.com>
> Subject: Re: [Kenwood] Backup rig - advice requested.
> To: Kenwood at mailman.qth.net
> Cc: Ts-940 at yahoogroups.com
> Date: Tuesday, November 8, 2011, 12:03 PM
> My TS-530S is my standby rig.
>> Full power, WARC bands, digital freq display, lousy SWR
> tolerance, and always excellent TX and audio reports.
>> 73 DE NO0OO
> _________________________________________________
>> Bill Kuhn 
> _________________________________________________
>> In God We Trust
>>> ________________________________
>> From: kenwood-bounces at mailman.qth.net
> on behalf of Kenneth G. Gordon
> Sent: Tue 11/8/2011 12:02 PM
> To: Kenwood at mailman.qth.net
> Cc: Ts-940 at yahoogroups.com
> Subject: [Kenwood] Backup rig - advice requested.
>>>> I am tentatively looking for an HF backup rig for my
> TS-940SAT. I am
> considering some of the older Kenwood transceivers such as
> the TS-
> 820S, and others.
>> I would appreciate learning what the members of this list
> would
> consider to be the most reliable of those older
> transceivers.
>> I am NOT particularly interested in all the "bells and
> whistles" as I
> am not going to use this for contesting. Most of my ham
> radio work is
> on CW and/or some digitail, primarily for
> traffic-handling.
>> What I would like to aquire is a simple, reliable, 100
> watts or so
> output transceiver, although I would like to have digital
> readout.
>> 12 VDC capability would be a bonus, but is not absolutely
> necessary.
>> I am experienced at repairing almost any piece of
> equipment, although
> simpler would require less time for such repairs.
>> Ken Gordon W7EKB
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
>> This list hosted by: http://www.qsl.net <http://www.qsl.net/> 
> Please help support this email list: http://www.qsl.net/donate.html
>>> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
>> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>______________________________________________________________
Kenwood mailing list
Home: http://mailman.qth.net/mailman/listinfo/kenwood
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Kenwood at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html