[Kenwood] Lamp and Filter Needed please: Info?

Sun Nov 22 22:05:34 EST 2009

Use some nice bright white LEDs if possible? Look cool and last forever? I
replaced the meter bulbs in my SW-2000 PWR meter with white LEDs, looks
awesome...
My 2 cents
Thanks,
Steve Restinetti
VA3FM / VE3SFV
va3fm at hotmail.com
ve3sfv at gmail.com
Grid: FN25OA
-----Original Message-----
From: kenwood-bounces at mailman.qth.net
[mailto:kenwood-bounces at mailman.qth.net] On Behalf Of Rob Stampfli
Sent: Sunday, November 22, 2009 10:03 PM
To: Les Zwiebel WB6ORZ
Cc: kenwood at mailman.qth.net
Subject: Re: [Kenwood] Lamp and Filter Needed please: Info?
On Sun, Nov 22, 2009 at 06:04:30PM -0800, Les Zwiebel WB6ORZ wrote:
> I need to replace the pilot lamp for my TS-430S. I searched 
> Kenwood Parts Distributors, and it's discontinued (p/n 
> B30-0817-25). It is the same as one of the lamps in the TS-830.
> I would also like to find a YK-88A AM Filter for the 
> TS-430S.
> Anyone please? Any leads?
> Tnx in advance.

When the pilot light (for the meter) burned out on my 430, I used a
Radio Shack bulb, (their part number: 272-1092). It is a physically
smaller bulb, but so far it has been working fine. Radio Shack seems
to be downsizing what they carry in their stores, so I don't know if
this bulb is still available. FWIW, the bulb is rated at 12V, 60ma,
10K hours. Good luck.
Rob
______________________________________________________________
Kenwood mailing list
Home: http://mailman.qth.net/mailman/listinfo/kenwood
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Kenwood at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html