[Kenwood] Re:Bandswitch shaft coupler p/n

Mon Jun 7 09:13:54 EDT 2004

The D22-0405-04 has been discontinued and replaced by the D22-0409-05.
Clif Holland, KA5IPF
AVVid
Authorized Kenwood and Icom Service Center
816 W Shady Grove Rd
Irving, TX 75060
www.avvid.com
1-800-214-5779
972-870-0630 (Local)
----- Original Message ----- 
From: <james27613 at att.net>
To: <kenwood at mailman.qth.net>
Sent: Monday, June 07, 2004 7:40 AM
Subject: [Kenwood] Re:Bandswitch shaft coupler p/n
> Hi Tom,
>> D22-0409-05 NYLON COUPLER R-5000 TS-820S TS-830S 9ドル.50
>> and the other type of coupler
>> D22-0405-04 (L2) COUPLING TS-530SP 7ドル.43
>> http://www.kenwoodparts.com
>> I did a search on coupler.
>> The part numbers came from my service manual
> ts-530 page 30 exploded views.
>> 73 james ke4drn
>>>> > Date: Sun, 6 Jun 2004 12:21:43 -0500
> > From: "Tom McDermott" <tom.mcdermott4 at verizon.net>
> > Subject: [Kenwood] TS-820 bandswitch coupler replacement?
>> > The white plastic bandswitch coupler in my TS-820S has broken at one
> > end (cracked so that is cannot grip one of the shafts tightly). It is
inside
> > the finals cage, and connects the end of the bandswitch rod to the final
> > tank switch. This renders the radio inoperative.
> >
> > It appears that the coupler was the first part used in the radio
> > assembly, and the entire readio is then constructed around that coupler!
> > With the finals removed and cage open, it's possible to touch it with a
> > small screwdriver, but barely. It's probably a lost cause to replace it,
so
> > repair efforts might aim towards a compression-band to compress the
coupler
> > end. I tried a small stainless-steel hose clamp, but the screw
protrusion on
> > the clamp is too tall, and does not fit in the space around the coupler.
> >
> > Has anyone sucessfully repaired one of these? The service manual
> > doesn't give any help here.
> >
> > -- Tom, N5EG
> _______________________________________________
> Kenwood mailing list
> Kenwood at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/subscribers.htm
>>