[Kenwood] Kenwood 520 on CW
Darrell Drake
[email protected]
Sun, 8 Feb 2004 22:56:35 -0500
VE1DS......
Put your TX frequency at CW 3.749.20, working split. I'm assuming you
have the remote VFO for that radio. You listen on LSB 3.750.00 on one VFO
and TX CW on the other VFO at 3.749.20. The receiving (net) station will
hear you at an 800Hz tone. If not, I don't know if it can be done. You might
be able to use the RIT to listen on LSB at 3.750 after you have set the VFO
to 3.749.20. Then when you want to TX, switch the mode switch to CW.
Hopefully, you might receive some better replies from elsewhere!
Cheers....
Darrell,
VA3DG/VE3DDG
>> Could someone please give me a short procedure to operate the Kenwood 520
on CW with the receiving station on LSB.
>> i.e. if I want to call into a LSB voice net with my radio on CW, eg the
net control station is on 3750 KHZ.LSB.
>> Thanks\
>> VE1DS