[Kenwood] dfc-230
David Rogers
[email protected]
2002年7月12日 18:37:27 -0700
TS-830S, TS-120S, TS-130S. It is a digital vfo with 4 memories. Memories
are volatile with the '830, and with the '120 unless the '120 is modified.
Memories are held with the '130 and modified '120 as long as power is
applied to the rig (even though the power switch on the rig is off). With
one of the 8 pin up/down mics, it allows the frequency to be controlled by
the mic (slow at first, then fast as the button is held down).
Very straight forward operation -- plug the din plug into the external vfo
connector on the back of the radio. Plug the mic cable into the mic
connector (if that feature is being used).
It is a great unit, and nice and small -- but should cost quite a bit less
than the full size digital vfo.
David, WA7ZYQ
----- Original Message -----
From: "Larry L. Ravlin" <[email protected]>
To: "Kenwood" <[email protected]>
Sent: Saturday, July 13, 2002 3:27 AM
Subject: [Kenwood] dfc-230
> O.K. here it is. I bought what I thought was a VFO-230 for my TS-830S
and
> when it arrives it is the DFC-230.......what is this thing used in
> conjunction with?
>> Larry
>> - - -
>> Your moderator for this list is:
> Larry Wilson KE1HZ [email protected]
>> _______________________________________________
> Kenwood mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/kenwood