[Dxbase] ICOM IC-7300 setup

Mon Nov 28 16:03:23 EST 2016

Joe,
 Thanks, that works okay. I tested it at radio 1. Thecomputer reads the radio's frequency okay for logging a contact. When I clickedon a spot to QSY that worked fine too. 
Then I moved it to radio 2. I want to have two radiosconnected at the same time. My older radio is radio 1. The new radio to radio2. 
I have the toolbar “QSO” turned on.  That toolbar shows a 2 button for radio 2.When I push radio 2 and log a contact or two the frequency of radio 2 is readokay.  When I click on a spot to QSY,radio 1 is always the one that changes frequency. If I log a contact afterthat, the frequency of radio 1 is read.  It appears that by clicking on QSY, the radio1 radio 2 button always changes to radio 1. Does anyone know how to stop that change?
73 Tom N4TL

 From: Joseph Glockner <wa6axe at verizon.net>
 To: n4tl2 at yahoo.com; dxbase at mailman.qth.net 
 Sent: Monday, November 28, 2016 2:12 PM
 Subject: Re: [Dxbase] ICOM IC-7300 setup

Tom,
Here is what I currently have:
[ICOM_IC-7300_SPLITOK]
P_LSB=0
P_USB=1
P_CW_USB=0
P_CW_LSB=0
P_AM=2
P_FM=5
P_FM_N=0
P_DATA_LSB=0
P_DATA_USB=0
P_DATA_FM=0
P_CW=3
P_FSK=4
P_RTTY=4
P_PACKET=4
P_CWR=3
LSB=0
USB=1
AM=2
CW=3
FSK=4
RTTY=4
FM=5
CWR=3
HIGH=1
MEDIUM=2
LOW=2
Address=0x94
PACING=5
FREQDIVIN=1
FREQDIVOUT=1
USEEXTENDEDMODES=0
FREQSHIFT=0
DefaultCW=3
DefaultFSK=4
DefaultRTTY=4
DefaultFM=5
DefaultAM=2
DefaultCWR=3
SelectVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(00) hex(fd)
eoc(100)
SetVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(00) bcd(%vfoa,5) hex(fd)
eoc(100)
GetVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(03) hex(fd) rrs(16) eoc(100)
PrsVFOA= hex(%dummy, 11) bcd(%vfoa,5) eoc(0)
SelectVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(01) hex(fd)
eoc(100)
SetVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(00) bcd(%vfob,5) hex(fd)
eoc(100)
GetVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(03) hex(fd) rrs(16) eoc(100)
PrsVFOB= hex(%dummy, 11) bcd(%vfob,5) eoc(0)
SetMode= hex(fe) hex(fe) hex(%ra) hex(e0) hex(06) hex(%mode) hex(fd)
eoc(100)
GetMode= hex(fe) hex(fe) hex(%ra) hex(e0) hex(04) hex(fd) rrs(13) eoc(100)
PrsMode= hex(%dummy, 11) hex(%mode) hex(%dummy) eoc(0)
SetFilter= hex(fe) hex(fe) hex(%ra) hex(e0) hex(06) nib("%mode %filter")
hex(fd) eoc(100)
GetFilter= hex(fe) hex(fe) hex(%ra) hex(e0) hex(04) hex(fd) eoc(100)
PrsFilter= hex(fe) hex(fe) hex(e0) hex(%dummy) hex(04) nib("%mode %filter")
hex(fd) eoc(0)
SetSplit= hex(fe) hex(fe) hex(%ra) hex(e0) hex(0f) hex(%split) hex(fd)
eoc(100)
GetSplit= hex(fe) hex(fe) hex(%ra) hex(e0) hex(0f) hex(fd) rrs(13) eoc(100)
PrsSplit= hex(%dummy, 11) hex(%split) hex(%dummy) eoc(0) 

Joseph Glockner
wa6axe at verizon.net

-----Original Message-----
From: Tom Lewis via Dxbase <dxbase at mailman.qth.net>
To: DXBase List <dxbase at mailman.qth.net>
Sent: Mon, Nov 28, 2016 1:08 pm
Subject: [Dxbase] ICOM IC-7300 setup
Does anyone have a Radios.ini file that includes the ICOM IC-7300
ThanksTom N4TL
______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dxbase at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html