[Dxbase] "previous toolbar" + access QRZ.COM

Sun Sep 16 08:16:43 EDT 2012

I've tried the suggested method and below is the QRZ.com page that opens.
----------------------------------------------------------------------------------------------------------Ooops... That page wasn't found on QRZIf you were looking for a callsign using a direct link, please note that our policy on direct links has changed. 
See the article here.Also, see: Linking to QRZPerhaps you were looking for one of these pages:The QRZ Main MenuCallsign DatabaseDiscussion ForumsOnline SwapmeetSubscriptions including XML Logbook DataRegistration Desk Get your free login ID and password here
--------------------------------------------------------------------------------------------
QRZ.com does provide instructions that, "http://www.qrz.com/db/(your_callsign)" should be used to access a direct lookup. 
Perhaps someone knows how this can be implemented in DXBase.
David
http://www.ve3vid.webs.com/
> From: al9a at mtaonline.net
> To: dijkers at skynet.be; dxbase at mailman.qth.net
> Date: 2012年9月15日 17:37:24 -0800
> Subject: Re: [Dxbase] "previous toolbar" + access QRZ.COM
>> Gerard,
>> Check the Help manual under DX Spot Alert Options. It sounds like you may 
> have something setup in the various DXBase filters that is only allowing a 
> "new" band/mode condition to pass through. Especially look at the section 
> for Individual Band/Mode Filters.
>> I'm not aware of anything special you need to do to get the qrz.com icon to 
> work. Merely have a call selected in the log and then click on the icon. 
> It should open a qrz.com web page with the call already entered for you.
>> 73,
> Gary AL9A
>>> ----- Original Message ----- 
> From: "G.Dijkers" <dijkers at skynet.be>
> To: <dxbase at mailman.qth.net>
> Sent: September 15, 2012 10:02 AM
> Subject: [Dxbase] "previous toolbar" + access QRZ.COM
>>> > Hi all,
> >
> > Just installed DXBase 2007 on a new Windows 7 machine
> > Almost everything works OK
> > Except:
> >
> > 1. The previous QSO toolbar (according to HELP) :
> > “Entries are automatically populated by many ways:
> >
> > 1. Incoming VHF or Internet DX spots.
> >
> > 2. Clicking on a QSO record in the QSO log.
> >
> > 3. Clicking a DX spot in the VHF or Internet packet windows.
> >
> > 4. Clicking a DX spot in the DX Info Spots tab.”
> >
> > However my incoming Internet DX spots do not show up unless it is a ‘new’ 
> > band/mode-point
> >
> >
> >
> > 2. I remember that accessing QRZ.COM via the icon had a change some 
> > time ago. I cannot find the modification in my ‘history’-files that is 
> > required to get it working.
> >
> > Any advice is highly appreciated
> >
> > Gerard, ON4AXU
> > ______________________________________________________________
> > Dxbase mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dxbase
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Dxbase at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html 
>> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html