[Dxbase] Support for QSL state "Verified" -- REPORT to make adi file for Club Log - WA6AXE

Joe WA6AXE wa6axe at hotmail.com
Mon Dec 10 20:10:08 EST 2012


Gary, I am running (right now) your own AL9A.mdb file that is from Dec 2011 - it has69,254 QSOs in it ... YES - the report DOES run slow ... but, if you are patient,it will finish .. ONCE the report is finished going thru the processing of theQSOs -- then it has to FORMAT each page of the report -- THAT does take time -since you logbook is very big ... just wait for the report itself to come into view. There never has been a SIZE problem with any of the reports.
 The CLUBLOG people (themself) ONLY said about the QSL_RCVD adif field ..So, THEIR OWN software is right now ONLY able to handle QSL_RCVD with the" V " ... OK -- YOUR AL9A.mdb logbook's 69,233 QSO -- "just" finished ... so, it WILL TAKEa few minutes for your CURRENT logbook to run -- just be patient and it will be there for you .. Your 69,233 QSO logbook takes up 14,511 PAGES that makesthe full report !!! It will be OK though Gary. 73 Joe wa6axe To: dxbase at yahoogroups.com; dxbase at mailman.qth.net
From: al9a at mtaonline.net
Date: 2012年12月10日 15:27:48 -0900
Subject: Re: [Dxbase] Support for QSL state "Verified" -- REPORT to make adi file for Club Log - WA6AXE
 
 
 
 
 
 Joe,
Thanks for getting involved so quickly with fix for the verified indicator. 
I was unaware that there already was an adiexportClubLog report in my 2007 
Standard Reports section.
I just downloaded the new report and txt file and updated my files. 
Unfortunately, I cannot seem to get the output to work. The report chunks 
along for a considerable time reading the 86,600 records in my mdb file, but 
then when it gets done it just seems to hang there and no report details are 
displayed. The header line with the print and email icons remains grayed 
out too. If I click on the report page the whole window goes light gray and 
the top bar says Not Responding. If I close the window, either with the red 
X or with Task Manager DXB2007 crashes and shuts down. Did this to me 
twice.
Is there a limit to how many records the report can handle? Or does it take 
a long time to organize the report after reading the records? I waited what 
seemed an eternity, probably a minute or so with no response before clicking 
on the window and causing the crash. Should I just be more patient and wait 
longer or what? Any advice appreciated.
On more thing before I forget. In the adif output file from DXB there are 
two fields (QSL_RCVD) and (LOTW_QSL_RCVD). Does your new version of this 
report also handle the (LOTW_QSL_RCVD) situation? I would hope so as I 
probably have more validated QSLs via LOTW than with cards. If the report 
is only catching card validated QSLs many of mine will be missed.
Thanks again.
73,
Gary AL9A
----- Original Message ----- 
From: "Joe WA6AXE" <wa6axe at hotmail.com>
To: <dxbase at yahoogroups.com>; <dxbase at mailman.qth.net>
Sent: December 10, 2012 4:50 AM
Subject: [Dxbase] Support for QSL state "Verified" -- REPORT to make adi 
file for Club Log - WA6AXE
>
> I have made an update to my DXbase Standard Style report that is entitled:

>
> adiexportClubLog.rpt

>
> If you have the AWARD column (for the QSO) checkmarked for DXCC and the

> QSO was confirmed via a QSL CARD, my report will make the

> QSL_RCVD entry with a V for Verified.

>
> If anyone wants to use this REPORT, it can be downloaded from:

>
>
> http://www.navycthistory.com/wa6axe/adiexportClubLog.html

>
>
>
> 73 Joe wa6axe

>
>
> __________________________________________________________

> Dxbase mailing list

> Home: http://mailman.qth.net/mailman/listinfo/dxbase

> Help: http://mailman.qth.net/mmfaq.htm

> Post: mailto:Dxbase at mailman.qth.net

>
> This list hosted by: http://www.qsl.net

> Please help support this email list: http://www.qsl.net/donate.html

>
>
> -----

> No virus found in this message.

> Checked by AVG - www.avg.com

> Version: 201302805 / Virus Database: 2634/5946 - Release Date: 12/08/12

>
 
 
 
 __._,_.___
 
 
 
 
 
 
 
 Reply via web post
 
 
 
 Reply to sender 
 
 
 
 Reply to group 
 
 
 Start a New Topic
 
 
 Messages in this topic
 (6)
 
 
 
 
 
 Recent Activity:
 
 
 
 
 Visit Your Group
 
 
 
 Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use • Send us Feedback 
 
 
 
 
 
 
 .
 
__,_._,___
 		 	 		 


More information about the Dxbase mailing list

AltStyle によって変換されたページ (->オリジナル) /