[Dxbase] ICOM 910H

Ron Stordahl AE5E ronn5in-dxbase2 at yahoo.com
Mon Oct 10 09:07:51 EDT 2011


>________________________________
>From: Joe WA6AXE <wa6axe at hotmail.com>
>To: lists at hatzakis.net; dxbase at mailman.qth.net
>Sent: Monday, October 10, 2011 1:05 AM
>Subject: Re: [Dxbase] ICOM 910H
>>>Michael,
>>Looking at the Manual for the IC-910H .. there is NO command where we can read the SPLIT
>Status -- same problem we are having with all of the other ICOMs except for the newest
>ones and the ICOM's which had a firmware update in very early 2011 ... But, your 910H
>is no on that list .. we can try to make a radios.ini file for your radio -- but, do you care
>about the not being able to read the SPLIT status?
>>73 Joe wa6axe
>>> From: lists at hatzakis.net
>> To: dxbase at mailman.qth.net
>> Date: Sun, 9 Oct 2011 18:49:30 -0700
>> Subject: [Dxbase] ICOM 910H
>>>> Group,
>>>> Just successfully reinstalled DXBase 2007 1.09 and also found a cool
>> program, Serial Port splitter and want to use it to log my Satellite
>> contacts, but, the channel is also used by SatPC32 to control the CAT
>> interface.  However, I just realized that there is no interface setting for
>> an ICOM 910H, has anyone successfully written communication parameters for
>> Radios.INI to communicate with this radio?  Anyone done the above
>> successfully?  Is there a button one can press to tell a contact to pull
>> the frequency from Radio 2?  (given I can get the communications to work)
>>>> Michael  K3MH
>>>>>>>> ______________________________________________________________
>> Dxbase mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dxbase
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Dxbase at mailman.qth.net
>>>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>                        
>______________________________________________________________
>Dxbase mailing list
>Home: http://mailman.qth.net/mailman/listinfo/dxbase
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Dxbase at mailman.qth.net
>>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>>>


More information about the Dxbase mailing list

AltStyle によって変換されたページ (->オリジナル) /