[Dxbase] FW: DXBase Suggestion

Sat May 7 16:29:35 EDT 2011

Hay that would be neat for the last two I need.
At 12:16 PM 5/7/2011, you wrote:
>And what's wrong with changing bands and using the tuning knob on your
>radio?
>>The next thing you're gonna want is a radio that will make the QSO for you,
>fill out the QSL and employ a robot to take it to the mail box.
>>73
>>Al, VE1AL
>>>>>-----Original Message-----
>From: dxbase-bounces at mailman.qth.net
>[mailto:dxbase-bounces at mailman.qth.net] On Behalf Of Crownhaven
>Sent: Saturday, May 07, 2011 1:05 PM
>To: n8dc-8 at comcast.net
>Cc: dxbase
>Subject: Re: [Dxbase] DXBase Suggestion
>>Greg, Dave is right. We know that. I'm looking for "on the fly" as Dave
>says. 17 meters is open for example. I want to chase some band countries.
>I don't want to go to the trouble of sending the information to the cluster
>because minutes later I might see activity on 12 and want to look there
>too.
>>Neal?
>>Steve, N4JQQ
>>n8dc-8 at comcast.net wrote:
> > I think we all know that.. its just easier on the fly to do it with a
>mouse click !
> > Its too bad when you do that the data coming thru DxBase doesn't change
>with CC user .
> > Simplicity i think was the reason on the original post .
> > Dave N8DC
> >
> >
> > ----- Original Message -----
> > From: "Greg Engle" <n6pyi at bak.rr.com>
> > To: n8dc-8 at comcast.net, "dxbase" <dxbase at mailman.qth.net>
> > Sent: Saturday, May 7, 2011 9:33:46 AM
> > Subject: RE: [Dxbase] DXBase Suggestion
> >
> > You can do that right now with a simple command to your spotting node!
> >
> > Go here for all the filters/users manual
> > http://www.dxcluster.org/main/
> >
> >
> > 7.1 Filters to accept spots based on frequency
> > <http://www.dxcluster.org/main/filtering_en.html>
> > Syntax: accept/spot [0-9] freq <range>
> >
> > or
> >
> > accept/spot [0-9] on <range>
> > Important: as noted before, both freq and on are exactly the same and
> > can be used interchangeably.
> > For range, you can specify a frequency like 7040, a range of
> > frequencies like 0/30000 ( the whole HF spectrum) or use any of the
> > band/region names defined in the SHOW/BANDS command (see above).
> > Examples...
> > This will pass on a HF spots only from 0 to 30,000 kHz and dump all
>others.
> > accept/spot 1 on 0/30000
> > This passes on all spots in the frequency range 144000 -> 148000 kHz
> > and trash all others.
> > accept/spot 2 freq 2m
> > This rule will only pass on spots on 6m, 4m, 2m, and 220 and reject
> > all others.
> > accept/spot 3 on vhf
> > This rule will pass on all spots on the 160m, 80m, 60m, 40m, 30m, 20m,
> > 17m, 15m, 12m, 10m bands and all spots on 70cm and 23cm bands only.
> > All other spots are trashed.
> > accept/spot 4 freq hf and freq uhf
> >
> > -----Original Message-----
> > From: dxbase-bounces at mailman.qth.net
> > [mailto:dxbase-bounces at mailman.qth.net]
> > On Behalf Of n8dc-8 at comcast.net
> > Sent: May 07, 2011 5:30 AM
> > To: dxbase
> > Subject: Re: [Dxbase] DXBase Suggestion
> >
> > I agree as I do the same thing . I really like that feature in CC user .
> > How about it Neal ?
> > Dave N8DC
> >
> >
> > ----- Original Message -----
> > From: "Crownhaven" <crownhaven at bellsouth.net>
> > To: "DXBase Reflector" <dxbase at mailman.qth.net>
> > Sent: Saturday, May 7, 2011 8:14:25 AM
> > Subject: [Dxbase] DXBase Suggestion
> >
> > It would be nice to have a future in DXB, similar to CC User, that
> > allows one to click on a specific band and only see spots from that
> > band. Right now I can toggle back to CC User but it would be even
> > nicer to have this ability and see the summary screen at the same time.
> >
> > Steve, N4JQQ
> >
> > ______________________________________________________________
> > Dxbase mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dxbase
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Dxbase at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net Please help support this email
> > list: http://www.qsl.net/donate.html
> >
> >
>______________________________________________________________
>Dxbase mailing list
>Home: http://mailman.qth.net/mailman/listinfo/dxbase
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Dxbase at mailman.qth.net
>>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>>______________________________________________________________
>Dxbase mailing list
>Home: http://mailman.qth.net/mailman/listinfo/dxbase
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Dxbase at mailman.qth.net
>>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html