[Dxbase] Autopopulating of previous QTH, State and County Inputs

Mon Sep 20 21:17:21 EDT 2010

Hi Jack,
Thanks for the reply, but don't think we are talking about the same thing.  I am 
not using a third-party CD rom. The auto-population I'm speaking about is 
obtained from my manual input of the Name, QTH, State and County into my log 
when I make a contact. Subsequent contacts with a station usuing the same 
callsign used to result in the auto-population of the Name, QTH, State and 
County into my log when I entered that contact. Now, only the Name is being 
autopopulated. The others must be re-entered. Any ideas?
Bob  K6ASK
________________________________
From: Jack <lennoxj at bellsouth.net>
To: BOB MUELLER <k6ask at yahoo.com>; Neal Campbell <nealk3nc at gmail.com>
Cc: : <dxbase at mailman.qth.net>
Sent: Mon, September 20, 2010 5:25:42 AM
Subject: Re: [Dxbase] Autopopulating of previous QTH, State and County Inputs
The data comes from your third-party CD rom info that you have stored on your 
hard drive per the DXbase instructions.  I assume you have all that in place and 
the auto population had been working but just quit.
1.  Did you close the QSL info window?  If so, don't do that.
2.  Did you change the path for your third-party CD data on your drive?  If so, 
put the path back.
3.  Did you change DXbase user options to deactivate auto population of CD rom 
data?  If so, fix user options.  If those options are already set correctly, try 
re-saving the options in case your dxb2007.ini file got corrupted.
----- Original Message ----- From: "BOB MUELLER" <k6ask at yahoo.com>
To: "Neal Campbell" <nealk3nc at gmail.com>
Cc: ":" <dxbase at mailman.qth.net>
Sent: Sunday, September 19, 2010 11:34 PM
Subject: [Dxbase] Autopopulating of previous QTH, State and County Inputs
Neal,
I am experiencing something with my DXB2007, which has not occurred before:
I have been using DXBase for many, many years and it has been auto-populating a
station's Name, QTH, State and County whenever the station's callsign is
re-entered after another contact. Now, only the "Name" is being auto-populated,
but not the QTH, State and County. Not certain if this required setting some
option, but checked to see if I had inadvertently changed a setting in the User
Options, etc.
Any ideas?
Bob, K6ASK
______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dxbase at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html