[Dxbase] Another Prefix Update Question

Tue Nov 30 12:58:04 EST 2010

Hi David
Yes they will, if not let me know! You have to do an Initialize Tables
command first however.
73
Neal Campbell
Abroham Neal Software
www.abrohamnealsoftware.com
(540) 645 5394
On Tue, Nov 30, 2010 at 12:52 PM, David Willis <w0rx at cropnet.com> wrote:
> Last year I had a meltdown of my DxBase 2007 installation and had to
> reinstall the software and import my backup database. All of that is
> fine. Since I lost all of the updates I had done to the software, via
> Joe's patches, etc. there are a number of prefixes that are not
> recognized. E7 for example, as well as the new batch of PJ's. Rather
> than apply the multiple patches and fixes I have been waiting for DxBase
> 2010 to roll out, since I figured that would solve the problem with one
> operation. And I would rather operate radio than play with my logging
> software. Just my personal bias.
>> It has occurred to me that perhaps I should ask, as I am importing
> thousands of QSO's from N1MM and/or Writelog contesting software, if I
> may blithely ignore the errors DxBase provides me about the prefixes
> which are not recognized. Will they be properly recognized when I
> "import" my database into the new release?
>> Positive news about this would be welcome!
>> Dave, W0RX
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>