[Dxbase] Inserting QSL Manager

Wed Mar 10 07:30:31 EST 2010

Gary, makes perfect sense. I appreciate your assistance.
73,
Steve, N4JQQ
Gary AL9A wrote:
> Steve,
>> Look at the QSL Info window. If you click on the call you just worked 
> it will show up in the DX Call box. Or you can manually type it in 
> there. If you are connected to a DX spotting cluster, click on the 
> Lock button to prevent the call from changing if a new spot is 
> posted. Right below is the Manager box. Enter the manager's call 
> there. Note the two radio buttons at the bottom of the screen to "Use 
> DXbase" or "Use CDROM". The address windows may or may not have info 
> for the managers call. If you don't use a call book CDROM check the 
> "Use DXbase" radio button. In the DXbase Address box you can manually 
> enter the QSL managers address OR go to QRZ and hunt up the manager's 
> call. When it comes up, click on the call and a window will open with 
> his address info. Copy it and then paste it into the DXbase Address 
> window. Hit the Save button and a window will pop up and ask if you 
> wish to add the manager's address info to the data base. Click yes 
> and another window will pop up and ask if you want to save the 
> manager's call as the routing for the DX call. Again say yes. Now 
> the call and his manager info is in the DXbase data base.
>> Set the QSL Via field set to either Manager or Mgr-Buro. Once that is 
> set click on the QSO label icon in the tool bar and the info will be 
> sent to the Pending Label data window. If you are sending direct also 
> click on the Address label icon in the tool bar and the manager's 
> address info will be sent to the Pending Label file. Before you print 
> the labels go to Output/Standard Reports/Database Topics/Label Topics 
> and print one of the adxf.rpt reports. This gives you a cross 
> reference list of the calls and their manager so you get the card into 
> the right envelope for mailing.
>> If you clicked on the Lock button to prevent the call from changing 
> due to a new spot, click it again to free it up.
>> 73,
> Gary AL9A
>>> ----- Original Message ----- From: "Crownhaven" 
> <crownhaven at bellsouth.net>
> To: "DXBase Reflector" <dxbase at mailman.qth.net>
> Sent: March 09, 2010 7:38 PM
> Subject: [Dxbase] Inserting QSL Manager
>>>> When I log a QSO and the op gives me his route or manager, where do
>> I/how do I enter that into the record so it is reflected when the card
>> is printed? I see where you can select the route, i.e., manager but I
>> don't know where to enter the call of the manager. This was easy in
>> 4.0. :)))))))
>>>> I did review help files but couldn't find it.
>>>> Steve, N4JQQ
>> ______________________________________________________________
>> Dxbase mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dxbase
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Dxbase at mailman.qth.net
>>>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html 
>>