[Dxbase] K-3

Mon Jun 28 12:57:21 EDT 2010

Please find attached a k3 definition file. 
to use 
back up your radios.ini file (make a copy some place..) 
open it up in windows notepad
open the attached file 
paste the contents on to the end of your radios.ini file 
restart dxbase and select Elecraft and K3 
ensure your port speed matches the K3's set port speed (usually 4800 or
38400) and you select word length 8, parity none, Stop bits 1 (or2) 
DTR and RTS lines may be used to activate PTT/CW keying (this is set as
a menu function on the k3) so do not check these options, CTS is also
not used 
If you run into any issues please let me know, i have been using dxbase
with my k3 for quite a while now 
73
Brendan EI6IZ (k3 #39) 
On Mon, 2010年06月28日 at 10:32 -0400, Neal Campbell wrote:
> Hi Mike
>> I have a K3 definition at home but am not there currently. If you remind me,
> I will send it to you once I return Thursday.
>> 73
>>> Neal Campbell
> Abroham Neal Software
> www.abrohamnealsoftware.com
> (540) 645 5394 NEW PHONE NUMBER
>> Amateur Radio: K3NC
> Blog: http://www.abrohamnealsoftware.com/blog/
> DXBase bug reports: email to cases at dxbase.fogbugz.com
> Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/
>>>>>> On Mon, Jun 28, 2010 at 9:11 AM, Mike Kasrich <aj9c at indy.rr.com> wrote:
>> > Does the selection for the K-2 work for the K-3? If not is anyone using
> > a particular radio selection that is working?
> >
> > Thanks
> > Mike/aj9c
> > ______________________________________________________________

-------------- next part --------------
[ELECRAFT_K3]
#Elecraft K2 revision 0.2 by Brendan Minish ei6iz.brendan at gmail.com
P_LSB=1
P_USB=2
P_CW_USB=0
P_CW_LSB=0
P_AM=5
P_FM=4
P_FM_N=0
P_DATA_LSB=0
P_DATA_USB=0
P_DATA_FM=0
P_CW=3
P_FSK=6
P_RTTY=6
P_PACKET=9
P_CWR=3
LSB=1
USB=2
CW=3
FM=4
AM=5
FSK=6
RTTY=6
CWR=7
HIGH=3
MEDIUM=2
LOW=1
OFF=0
ON=1
FREQDIVIN=1
FREQDIVOUT=1
USEEXTENDEDMODES=0
FREQSHIFT=0
PACING=0
DefaultCW=3
DefaultAM=5
DefaultFSK=6
DefaultRTTY=6
DefaultFM=4
DefaultCWR=3
SelectVFOA= eoc(0)
SetVFOA=asc( "FR0;" ) asc( "FA" ) dec( %vfoa,11 ) asc( ";" ) asc("MD") dec( %mode,1) asc ( ";" ) eoc(0)
GetVFOA= asc("FA;") rrs(14) eoc(0)
PrsVFOA= asc("FA") dec(%vfoa,11) asc(";") eoc(0)
SelectVFOB= eoc(0)
SetVFOB= asc( "FB" ) dec( %vfob,11 ) asc( ";" ) eoc(0)
GetVFOB= asc("FB;") rrs(14) eoc(0)
PrsVFOB= asc("FB") dec(%vfob,11) asc(";") eoc(0)
SetMode= eoc(0)
GetMode= asc( "IF;" ) rrs(38) eoc(0)
PrsMode= asc("IF") dec(%dummy,27) dec(%mode,1) dec(%dummy,7) asc(";") eoc(0)
SetFilter= eoc(0)
GetFilter= asc("K31;") asc( "FW;" ) eoc(0)
PrsFilter= asc("FW") dec(%dummy,4) dec( %filter, 1 ) asc ( ";" ) eoc(0)
SetSplit= asc( "FT" ) dec( %split ) asc ( ";" ) eoc(0)
GetSplit= asc( "IF;" ) rrs(38) eoc(0)
PrsSplit= asc("IF") dec(%dummy,30) dec(%split,1) dec(%dummy,4) asc(";") eoc(0)