[Dxbase] Port problems..

Mon May 11 17:59:03 EDT 2009

Hey Al, how's the nurse maid doing? I have found that the program reads and 
controls radio 1 but only reads the radio 2 info. There is no control of 
radio 2. It doesn't work like the radio 1 and 2 setup on Logger 32. Fred 
found the same thing. Tim K8NWD
----- Original Message ----- 
From: "Al Bailey" <k8six at comcast.net>
To: <dxbase at mailman.qth.net>
Sent: Sunday, May 10, 2009 11:33 PM
Subject: [Dxbase] Port problems..
I recently had a mother board go belly up so was forced to upgrade my
PC. I now have a Dual Core system with 4 gig of ram but have
encountered a problem with the new mother board. It does NOT have ANY
serial ports.
I thought this would not present a problem as I have a Byte Runner
PCI to 8 port serial card. There is one Com port on the system board
but no cable to the rear nor any place to put a DB9 so I deactivated
it so it is not seen. I then configured my Byte Runner to see Com 1
thru Com 8.. Here is what I have connected so far.
Com 1=FT1000MP
Com 2=TS2000X
Com 3=W5XC Keyer
Com 4=Rigblaster
Com 5=Alpha 87
I can get the FT1000MP to work with no problem on Com 1 but when I
click the icon to switch to Com 2 it still controls the FT1000MP but
should control the TS2000X.
I looked in my INI file and it seems OK so I am lost at this point.
Anybody have any ideas? I am running XP Pro SP3 for the record.
Any help will certainly be appreciated. Thanks and 73 de K8SIX
BTW Byte Runner was bought out by VSCom
______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dxbase at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html