[Dxbase] IC-746pro

Fri Jun 13 07:19:06 EDT 2008

Guys
I was an Icom user and did have my 756 Pro3 backup radio working with 
DXB2007 at one time
I did suffer some problems with one s/w package (probably NOT DXbase) in 
that the radio has its address set in Hex anmd the s/w was using decimal, or 
the opposite was around. Look out for that.
73 Fred
G4BWP
----- Original Message ----- 
From: "Greg - N4CC" <n4cc at alltel.net>
To: <penrith.comms at gmail.com>; "JV" <jv at kt4u.org>
Cc: <dxbase at mailman.qth.net>
Sent: Friday, June 13, 2008 2:45 PM
Subject: Re: [Dxbase] IC-746pro
>A friend of mine just bought a 746 Pro and he is having trouble getting it 
>to respond to DXBase 2007. I downloaded the manual from the Icom site and 
>see that the you can set the address by going to the set-mode...item 36 
>sets baud rate and 37 is the address. My friend's radio was set to 66h 
>which appears to be what is in the .ini file. If you get an answer, I hope 
>you'll post it to the reflector... Thanks and 73 de Greg-N4CC
>> At 08:10 AM 6/12/2008, Chris Poulson wrote:
>>Hi,
>>>>Not 100% sure of the exact details but you need to find which address your 
>>ICOM is set to in the Menus, then you will need to edit the section in 
>>Radios.ini that relates to your radio and change the address to the same 
>>as the radio. I don't have an Icom anymore so this is from my poor memory 
>>:-)
>>>>>>>>On Mon, 9 Jun 2008 19:03:38 -0400 (Eastern Daylight Time), you wrote:
>>>> > Need a little help. Any one have an IC-746pro running with 
>> > DXBase2005.
>> >For some reason I can't get the computer to talk with the IC-746pro. 
>> >Radios
>> >ini is installed and I think I have Options/Radio 1 set up for 
>> >IC-746pro.
>> >Got to be some thing simple that I'm over looking. Maybe in the 
>> >polling???
>> >What are you guys using in Radios.ini or in the setup?
>> >
>> > The interface is working OK with my contest program N1MM Logger.
>> >______________________________________________________________
>> >Dxbase mailing list
>> >Home: http://mailman.qth.net/mailman/listinfo/dxbase
>> >Help: http://mailman.qth.net/mmfaq.htm
>> >Post: mailto:Dxbase at mailman.qth.net
>>>>Chris Poulson
>>>>______________________________________________________________
>>Dxbase mailing list
>>Home: http://mailman.qth.net/mailman/listinfo/dxbase
>>Help: http://mailman.qth.net/mmfaq.htm
>>Post: mailto:Dxbase at mailman.qth.net
>> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>>