[Dxbase] QSL card Layout and printing via DXbase

Sat Feb 17 22:54:06 EST 2007

Paul,
I will try to do a layout/photo files that will show the
various layouts/setups for various scenarios. And, when
finished, I will put it up on my website.
73 Joe wa6axe
Paul Cassel wrote:
> So why not share with the list how to change the layout :)
>> Paul
>>>>-----Original Message-----
>>From: dxbase-bounces at mailman.qth.net 
>>[mailto:dxbase-bounces at mailman.qth.net] On Behalf Of Joseph Glockner
>>Sent: February 17, 2007 10:41 PM
>>To: Wayne Jones
>>Cc: 'DXBase'
>>Subject: Re: [Dxbase] QSL card Layout and printing via DXbase
>>>>>>Wayne,
>>>>As are just about all of the cards.. but, that is not
>>what Mike was concerned about. The concern was "within
>>the DXbase Label Designer Module" - Mike wanted
>>to be able to layout the card "horizontally" - but, have
>>it print vertically in the printer.
>>>>NO Problem now .. He has been able to do what he wanted.
>>>>Joe wa6axe
>>>>>>Wayne Jones wrote:
>>>>>>>90% of the cards received at the Hawaii bureau are 
>>>>horizontal -- and 
>>>>>not just my own! I am the bureau manager for the Hawaii 
>>>>Bureau (KH6) 
>>>>>and the vast majority of the cards I sort are horizontal.
>>>>>>>>>Aloha
>>>Wayne, NH6K
>>>>>>-----Original Message-----
>>>From: dxbase-bounces at mailman.qth.net 
>>>[mailto:dxbase-bounces at mailman.qth.net]
>>>On Behalf Of Joseph Glockner
>>>Sent: Saturday, February 17, 2007 2:33 PM
>>>To: ve3wej gmail
>>>Cc: DXBase
>>>Subject: Re: [Dxbase] QSL card Layout and printing via DXbase
>>>>>>He was talking about printing on his Pre-Made QSL card.. but, the 
>>>biggie here is that he wanted to design with the longest side being 
>>>left-to-right, vice the "normal" vertical format.. Mike has already 
>>>done his card all ok now..
>>>>>>73 Joe wa6axe
>>>>>>>>>ve3wej gmail wrote:
>>>>>>>>>>>>>I print directly to a dxbase created qsl, is this what he means, or
>>>>is he talking about printing over top of a pre made qsl
>>>>----- Original Message ----- From: "Joseph Glockner" 
>>>><jglock2 at airmail.net>
>>>>To: "DXBase Reflector" <dxbase at mailman.qth.net>
>>>>Sent: Saturday, February 17, 2007 5:41 PM
>>>>Subject: [Dxbase] QSL card Layout and printing via DXbase
>>>>>>>>>>>>>>>>>>>>>Some of you may have seen Mike's (K3MH) email about 
>>>>printing directly
>>>>>>>to a QSL card - but not having the layout the normal 
>>>>vertical layout 
>>>>>>>(in the label designer module).
>>>>>>>>>>Since I have never needed to do what he wanted to do, I have
>>>>>experimented with the designer and found that YES - it can be done.
>>>>>>>>>>Just FYI.
>>>>>>>>>>73 Joe wa6axe
>>>>>>>>>>______________________________________________________________
>>>>>Dxbase mailing list
>>>>>Home: http://mailman.qth.net/mailman/listinfo/dxbase
>>>>>Help: http://mailman.qth.net/mmfaq.htm
>>>>>Post: mailto:Dxbase at mailman.qth.net
>>>>>>>>>>>>______________________________________________________________
>>>>Dxbase mailing list
>>>>Home: http://mailman.qth.net/mailman/listinfo/dxbase
>>>>Help: http://mailman.qth.net/mmfaq.htm
>>>>Post: mailto:Dxbase at mailman.qth.net
>>>>>>>>>>>>>>>>>>______________________________________________________________
>>>Dxbase mailing list
>>>Home: http://mailman.qth.net/mailman/listinfo/dxbase
>>>Help: http://mailman.qth.net/mmfaq.htm
>>>Post: mailto:Dxbase at mailman.qth.net
>>>>>>>>>>>>>>>>______________________________________________________________
>>Dxbase mailing list
>>Home: http://mailman.qth.net/mailman/listinfo/dxbase
>>Help: http://mailman.qth.net/mmfaq.htm
>>Post: mailto:Dxbase at mailman.qth.net
>>>>>>>