[Dxbase] MMTTY with DXbase -- info

Mon Aug 13 00:58:28 EDT 2007

You have also been able to log (for a long time) directly into DXBase =
using
HamScope.
HamScope does bpsk31, qpsk31, CW, mfsk16, RTTY using soundcard OR the =
MMTTY
engine also does soundcard packet using the AGW packet engine (AGWPE).
You can now log directly to DXBase using DM780 which is included in the
latest
Ham Radio Deluxe betas. Right now it only does soundcard BPSK31/63/125
QPSK31/63/125 and
Soundcard RTTY.
Below is and except from the DM780 users guide.
-------------------------------------------------------------------------=
---
-------------
The development target is to support the commonly used digital
modes by the end of 2007, these modes being:
=95 CW
=95 DominoEX 4, DominoEX 5, DominoEX 8, DominoEX 11, DominoEX 16, =
DominoEX 22
=95 Feld-Hell, FSK-Hell, FSK-Hell 105
=95 MFSK-8, MFSK-16, MFSK-16 pix
=95 OLIVIA various tones and bandwidth
=95 RTTY various Baud Rates, Shifts, Number of data bits, etc.
=95 Throb-1 Throb-2 Throb-4 ThrobX-1 ThrobX-2 ThrobX-4
The above list is taken from Fldigi, a fine digital mode program for
Linux. For more information: http://www.w1hkj.com/Fldigi.html .
The author of Fldigi, W1HKJ has kindly allowed me to use his code
for these modes.
Once this is work is finished WSJT will very probably be added.
-------------------------------------------------------------------------=
---
--------
You can download the latest beta at the link below.
http://www.ham-radio.ch/kits/beta/3.5/1560/
-----Original Message-----
From: dxbase-bounces at mailman.qth.net =
[mailto:dxbase-bounces at mailman.qth.net]
On Behalf Of Joseph Glockner
Sent: Sunday, August 12, 2007 8:54 PM
To: DXBase Reflector
Subject: [Dxbase] MMTTY with DXbase -- info
To all DXbase 2004 thru 2007 users:
Just as a reminder - MMTTY is 'already' available for use directly =
'logging
into' DXbase 2004 thru 2007!!
The MMTTY people (Oba) made a 'Bridge' program called MMD6.0 -- with =
this
bridge program, you can RUN the Full-blown/Complete MMTTY program (not =
just
the engine) and log directly into DXbase.
As with any of the MMHamsoft programs, the user WILL have to go to the
MMHamsoft website and just simply download the FREE MMTTY and MMD6.0
programs ...
Once you have both of these SETUP - you WILL be able to operate MMTTY =
and
log-into DXbase directly... it's as simple as that ...
I am right now making up some screen-captures --
If anyone - who has NOT tried MMTTY and wanted to do so, and have it log
directly into DXbase - and would like more info, pse just send me an =
email
and I will send you the screen-shots, etc ...
There is no need to wait for the next release, etc -- as the direct =
logging
into DXbase has been available for just about a full year now!!
73 Joe wa6axe
______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dxbase at mailman.qth.net
No virus found in this incoming message.
Checked by AVG Free Edition.=20
Version: 7.5.476 / Virus Database: 269.11.15/949 - Release Date: =
8/12/2007
11:03 AM
=20
No virus found in this outgoing message.
Checked by AVG Free Edition.=20
Version: 7.5.476 / Virus Database: 269.11.15/949 - Release Date: =
8/12/2007
11:03 AM
=20