[Dxbase] record load time

Mon Nov 20 17:14:36 EST 2006

Since I see you are running the 756Pro2
I bet you can lower the pacing from 5 to 1
and change all the eoc(100) to eoc(1) and
you will get more faster, HI. As I said before
 Make a copy of your radios.ini file and store it somewhere safe before you
start
editing so IF you should mess something up you can always copy it back
73 de Tony, KD4K
-----Original Message-----
From: dxbase-bounces+tonycash=adelphia.net at mailman.qth.net
[mailto:dxbase-bounces+tonycash=adelphia.net at mailman.qth.net] On Behalf Of
Tony Cash
Sent: Monday, November 20, 2006 5:08 PM
To: 'Greg'; 'Paul Cassel'
Cc: dxbase at mailman.qth.net
Subject: RE: [Dxbase] record load time
I am using my IC-706MKIIG right now with almost instantaneous logging.
Below is the part of the radios.ini file that I had to change to
get the control speed up to par. I changed the pacing from 50 down to 1
and all the eoc(***) where * equals a number (mostly 150 and 250) down to
eoc(1),
some that were at 0 were left at 0.
This really makes a difference in how fast DXBase reads and sets the radio.
I am sure these numbers could be changed to lower values for other radios to
speed up the control. You just have to experiment to see how far down you
can
go with the numbers.
Make a copy of your radios.ini file and store it somewhere safe before you
start
editing so IF you should mess something up you can always copy it back.
pacing = 1
SelectVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(00) hex(fd) eoc(1)
SetVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(00) bcd(%vfoa,5) hex(fd)
eoc(1)
GetVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(03) hex(fd) rrs(16) eoc(1)
PrsVFOA= hex(%dummy, 11) bcd(%vfoa,5) eoc(0)
SelectVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(01) hex(fd) eoc(1)
SetVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(00) bcd(%vfob,5) hex(fd)
eoc(1)
GetVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(03) hex(fd) rrs(16) eoc(1)
PrsVFOB= hex(%dummy, 11) bcd(%vfob,5) eoc(0)
SetMode= hex(fe) hex(fe) hex(%ra) hex(e0) hex(06) hex(%mode) hex(fd) eoc(1)
GetMode= hex(fe) hex(fe) hex(%ra) hex(e0) hex(04) hex(fd) rrs(13) eoc(1)
PrsMode= hex(%dummy, 11) hex(%mode) hex(%dummy) eoc(0)
SetFilter= hex(fe) hex(fe) hex(%ra) hex(e0) hex(06) nib("%mode %filter")
hex(fd) eoc(1)
GetFilter= hex(fe) hex(fe) hex(%ra) hex(e0) hex(04) hex(fd) eoc(1)
PrsFilter= hex(fe) hex(fe) hex(e0) hex(%dummy) hex(04) nib("%mode %filter")
hex(fd) eoc(0)
SetSplit= hex(fe) hex(fe) hex(%ra) hex(e0) hex(0f) hex(%split) hex(fd)
eoc(1)
GetSplit= hex(fe) hex(fe) hex(%ra) hex(e0) hex(17) hex(fd) rrs(12) eoc(1)
PrsSplit= hex(%dummy, 10) bit(%split, 0) hex(%dummy) eoc(0)
 
73 de Tony, KD4K
My Radio web site
http://home.adelphia.net/~tonycash/kd4k/radio.html
My Weather Web Site
http://home.adelphia.net/~tonycash
Sawnee Mountain Repeater Web Site
http://www.sawneemtn.org/
-----Original Message-----
From: dxbase-bounces+tonycash=adelphia.net at mailman.qth.net
[mailto:dxbase-bounces+tonycash=adelphia.net at mailman.qth.net] On Behalf Of
Greg
Sent: Monday, November 20, 2006 4:37 PM
To: Paul Cassel
Cc: dxbase at mailman.qth.net
Subject: Re: [Dxbase] record load time
i had that problem when having my icom 706mkIIG connected to dxbase you 
need to decrease
a number in a file to speed it up and i cant remember what file and what 
number it was
hope this helps
N8TDL
Paul Cassel wrote:
> FYI 
>> With 25K records on my 1.8G AMD and DXB 2006, it takes about 1 second
>> Paul VE3SY
>> -----Original Message-----
> From: dxbase-bounces+paul=ve3sy.com at mailman.qth.net
> [mailto:dxbase-bounces+paul=ve3sy.com at mailman.qth.net] On Behalf Of Art
> Holmes
> Sent: Monday, November 20, 2006 3:52 PM
> To: dxbase at mailman.qth.net
> Subject: [Dxbase] record load time
>>> When I type a call into my log and hit enter it takes 4 seconds to
complete.
> I am using dxbase 2007 and the file size is 49,750 records. 
>> Results were similar with 2005, and 2006 releases. Is this what I should
> expect or any ideas on improving the time.? Thanks art w1rzf
>> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>>>
______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dxbase at mailman.qth.net
-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.430 / Virus Database: 268.14.9/540 - Release Date: 11/20/2006
3:04 AM
 
-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.430 / Virus Database: 268.14.9/540 - Release Date: 11/20/2006
3:04 AM
 
______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dxbase at mailman.qth.net
-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.430 / Virus Database: 268.14.9/540 - Release Date: 11/20/2006
3:04 AM
 
-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.430 / Virus Database: 268.14.9/540 - Release Date: 11/20/2006
3:04 AM