[Dxbase] MMTTY -full version- is now interfaced with DXbase - tnxto Oba JA7UDE

Thu Nov 9 15:27:53 EST 2006

Eric,
You just use the MMTTY program like you always do .. When
you are wanting to start to LOG a QSO - you press the QSO
button - then as the qso continues, click-on each of the
data infos (callsign, etc) and they will be placed into
each of the textboxes in MMTTY -- then as you CLICK the
QSO button in MMTTY one more time, the QSO data is ALSO
(now) sent to DXbase ...
YOU MUST imi MUST read the TXT file that is in the MMD6.0
zip file ... it tells you that you MUST go into MMTTY
program's :
Option(O) / Setup Logging(L)...
"and" go to the Conversion TAB in that window - and look
to the right-hand side of that window and you MUST radiobutton
Turbo HAMLOG/Win !!! Once you do this and say OK ... then
the BRIDGE/Interface will log into DXbase all ok..
73 Joe wa6axe
Eric - VE3GSI wrote:
> Ok Joe,
>> I have Bridge running, DXBase on the go a call on my MMTTY screen, I click
> it, it goes to the MMTTY screen. How does it get from there to DXBase?
>> Eric
>>> -----Original Message-----
> From: Joseph Glockner
>> To all:
>> There was an email on the MMTTY reflector this morning from JA7UDE (Oba). He
> said that Gavin GM0GAV had asked him to make an interface between MMTTY
> (full blown version) and DXbase.
>> Oba has made a "Bridge tool" program (sometime ago) and NOW
> has added DXbase to the program - so that we CAN run MMTTY and LOG directly
> into DXbase.
>> You can access this file at the URL:
> http://groups.yahoo.com/group/MMTTY/files/MMD600.zip
>> I have tried the "bridge tool" program and it works perfectly.
>> Be sure to read the TXT file that is in the MMD600.zip
> file..
>> You run the MMD600.exe program "first" -- then you open up MMTTY and DXbase
> .. you will see that the MMD600.exe program will acknowledge BOTH the MMTTY
> and DXbase programs by turning the BOX next to their names to a GREEN
> color..
>> You just simply USE MMTTY as you normally would, but when you click the QSO
> button for the 2nd time -- the QSO will be logged in DXbase -- be sure and
> SAVE the QSO in DXbase before you start another one..
>> Tnx to Gavin for asking Oba to do this for us!!
>> 73 to all -- I am passing the above info along a FYI.. and, YES!
> the bridge tool program will work with any version of
> DXbase2004 and newer ...
>>> Joe wa6axe
>> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>>