[Dxbase] MMTTY -full version- is now interfaced with DXbase - tnxto Oba JA7UDE

Thu Nov 9 15:10:01 EST 2006

Jim,
I don't see why not --- I brought up the RemMFC version of the
MMTTY engine -- and the MMD6.0 recognized that!! BUT, in the
RemMFC, there is no way for me to doublecheck that it will LOG
the entry - since there is not textboxes for callsign, etc ...
Give it a try Jim!
Joe wa6axe
Jim McDonald wrote:
> This is excellent news. Would it be possible to use the MMTTY plug-in as
> Writelog and other programs do? With the plug-in, only the MMTTY tuning
> indicator is visible (not the full-blown MMTTY program), and it's a small
> window within Writelog's screen. The call of the station being worked is
> entered directly into Writelog.
>> Jim N7US 
>>> -----Original Message-----
> From: dxbase-bounces+jim=n7us.net at mailman.qth.net
> [mailto:dxbase-bounces+jim=n7us.net at mailman.qth.net] On Behalf Of Joseph
> Glockner
> Sent: Thursday, November 09, 2006 12:23 PM
> To: DXBase Reflector
> Subject: [Dxbase] MMTTY -full version- is now interfaced with DXbase - tnxto
> Oba JA7UDE
>> To all:
>> There was an email on the MMTTY reflector this morning from
> JA7UDE (Oba). He said that Gavin GM0GAV had asked him to make
> an interface between MMTTY (full blown version) and DXbase.
>> Oba has made a "Bridge tool" program (sometime ago) and NOW
> has added DXbase to the program - so that we CAN run MMTTY and
> LOG directly into DXbase.
>> You can access this file at the URL:
> http://groups.yahoo.com/group/MMTTY/files/MMD600.zip
>> I have tried the "bridge tool" program and it works perfectly.
>> Be sure to read the TXT file that is in the MMD600.zip
> file..
>> You run the MMD600.exe program "first" -- then you open up
> MMTTY and DXbase .. you will see that the MMD600.exe program
> will acknowledge BOTH the MMTTY and DXbase programs by turning
> the BOX next to their names to a GREEN color..
>> You just simply USE MMTTY as you normally would, but when you
> click the QSO button for the 2nd time -- the QSO will be logged
> in DXbase -- be sure and SAVE the QSO in DXbase before you start
> another one..
>> Tnx to Gavin for asking Oba to do this for us!!
>> 73 to all -- I am passing the above info along a FYI.. and, YES!
> the bridge tool program will work with any version of
> DXbase2004 and newer ...
>>> Joe wa6axe
>>>> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>>>>>