R: [Dxbase] DXB2006 and IC-7000

Sun May 14 02:37:34 EDT 2006

Hi Peter,
I try it, but doesn't work very fine, when I push on spot, ch'ange a MODE,
but not change a frequency, why?
Please help me...
Best regards...
IZ7AUH Frank
-----Messaggio originale-----
Da: Peter W2IRT [mailto:w2irt at comcast.net] 
Inviato: sabato 13 maggio 2006 23.21
A: IZ7AUH; dxbase at mailman.qth.net
Oggetto: Re: [Dxbase] DXB2006 and IC-7000
At 03:48 PM 05/13/2006, IZ7AUH wrote:
>To day I buy a ICOM IC-7000, my DXB 2006 doesn't support, please help me.

Hi Frank,
Find your radios.ini file in your DX Base folder. Make a copy of the 
file and call the copy something else (like radios-known-good or 
similar). Open radios.ini itself (not the re-named copy!) and add the 
following data (cut and paste), then save the file and re-start DX 
Base, go into the options section and select either the IC-7000 
option or IC-7000-VFO-A-Only option. I used the latter while in the 
Bahamas earlier this year and it worked OK.
Maybe someone with more knowledge than I have can tailor some entries 
specifically for the 7000 for next time.
Copy and paste the following:
[ICOM_IC-7000]
#IC-756 series revision by N5IN at digikey.com
P_LSB=0
P_USB=1
P_CW_USB=0
P_CW_LSB=0
P_AM=2
P_FM=5
P_FM_N=0
P_DATA_LSB=0
P_DATA_USB=0
P_DATA_FM=0
P_CW=3
P_FSK=4
P_RTTY=4
P_PACKET=4
P_CWR=3
LSB=0
USB=1
AM=2
CW=3
FSK=4
RTTY=4
FM=5
CWR=3
HIGH=1
MEDIUM=2
LOW=2
Address=0x70
PACING=2
FREQDIVIN=1
FREQDIVOUT=1
USEEXTENDEDMODES=0
FREQSHIFT=0
DefaultCW=3
DefaultFSK=4
DefaultRTTY=4
DefaultFM=5
DefaultAM=2
DefaultCWR=3
SelectVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(d0) hex(fd)
eoc(100)
SetVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(00) bcd(%vfoa,5) hex(fd)
eoc(100)
GetVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(03) hex(fd) rrs(16) eoc(100)
PrsVFOA= hex(%dummy, 11) bcd(%vfoa,5) eoc(0)
SelectVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(d1) hex(fd)
eoc(100)
SetVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(00) bcd(%vfob,5) hex(fd)
eoc(100)
GetVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(03) hex(fd) rrs(16) eoc(100)
PrsVFOB= hex(%dummy, 11) bcd(%vfob,5) eoc(0)
SetMode= hex(fe) hex(fe) hex(%ra) hex(e0) hex(06) hex(%mode) hex(fd)
eoc(100)
GetMode= hex(fe) hex(fe) hex(%ra) hex(e0) hex(04) hex(fd) rrs(13) eoc(100)
PrsMode= hex(%dummy, 11) hex(%mode) hex(%dummy) eoc(0)
SetFilter= hex(fe) hex(fe) hex(%ra) hex(e0) hex(06) nib("%mode 
%filter") hex(fd) eoc(100)
GetFilter= hex(fe) hex(fe) hex(%ra) hex(e0) hex(04) hex(fd) eoc(100)
PrsFilter= hex(fe) hex(fe) hex(e0) hex(%dummy) hex(04) nib("%mode 
%filter") hex(fd) eoc(0)
SetSplit= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(c0) hex(fd) 
eoc(100) hex(fe) hex(fe) hex(%ra) hex(e0) hex(0f) hex(%split) hex(fd)
eoc(100)
GetSplit= hex(fe) hex(fe) hex(%ra) hex(e0) hex(17) hex(fd) rrs(12) eoc(100)
PrsSplit= hex(%dummy, 10) bit(%split, 0) hex(%dummy) eoc(0)
[ICOM_IC-7000_VFO_A_Only]
#IC-756 series revision by N5IN at digikey.com
P_LSB=0
P_USB=1
P_CW_USB=0
P_CW_LSB=0
P_AM=2
P_FM=5
P_FM_N=0
P_DATA_LSB=0
P_DATA_USB=0
P_DATA_FM=0
P_CW=3
P_FSK=4
P_RTTY=4
P_PACKET=4
P_CWR=3
LSB=0
USB=1
AM=2
CW=3
FSK=4
RTTY=4
FM=5
CWR=3
HIGH=1
MEDIUM=2
LOW=2
Address=0x70
PACING=2
FREQDIVIN=1
FREQDIVOUT=1
USEEXTENDEDMODES=0
FREQSHIFT=0
DefaultCW=3
DefaultFSK=4
DefaultRTTY=4
DefaultFM=5
DefaultAM=2
DefaultCWR=3
SelectVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(d0) hex(fd)
eoc(100)
SetVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(00) bcd(%vfoa,5) hex(fd)
eoc(100)
GetVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(03) hex(fd) rrs(16) eoc(100)
PrsVFOA= hex(%dummy, 11) bcd(%vfoa,5) eoc(0)
SelectVFOB=
SetVFOB=
GetVFOB=
PrsVFOB=
SetMode= hex(fe) hex(fe) hex(%ra) hex(e0) hex(06) hex(%mode) hex(fd)
eoc(100)
GetMode= hex(fe) hex(fe) hex(%ra) hex(e0) hex(04) hex(fd) rrs(13) eoc(100)
PrsMode= hex(%dummy, 11) hex(%mode) hex(%dummy) eoc(0)
SetFilter= hex(fe) hex(fe) hex(%ra) hex(e0) hex(06) nib("%mode 
%filter") hex(fd) eoc(100)
GetFilter= hex(fe) hex(fe) hex(%ra) hex(e0) hex(04) hex(fd) eoc(100)
PrsFilter= hex(fe) hex(fe) hex(e0) hex(%dummy) hex(04) nib("%mode 
%filter") hex(fd) eoc(0)
SetSplit= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(c0) hex(fd) 
eoc(100) hex(fe) hex(fe) hex(%ra) hex(e0) hex(0f) hex(00) hex(fd) eoc(100)
GetSplit= hex(fe) hex(fe) hex(%ra) hex(e0) hex(17) hex(fd) rrs(12) eoc(100)
PrsSplit= hex(%dummy, 10) bit(%split, 0) hex(%dummy) eoc(0)
Cheers,
Peter,
W2IRT 